Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
12.1. Specifications
12.2. External equipment and body elements
12.2.1. Removal installation of levers of screen wipers
12.2.2. Removal of a drive of forward screen wipers
12.2.3. Removal and cowl installation
12.2.4. Removal and installation of the lock of a cowl
12.2.5. Removal and installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl
12.2.6. Removal and installation of a forward lattice
12.2.7. Removal and installation of covers of block headlights
12.2.8. Removal and installation of a boot of an impellent compartment of a complete set of AMG
12.2.9. Removal and installation of lateral steps
12.2.10. Removal and installation of bumpers
12.2.11. Removal and installation of door rear-view mirrors
12.2.12. Removal and installation of the tank of liquid of washing of glasses
12.2.13. Removal and installation of the holder of a spare wheel
12.2.14. Removal and installation of loker of protection of wheel arches
12.2.15. Removal and installation of panels of external furnish of racks And
12.2.16. Removal and installation of forward wings
12.2.17. Removal, installation and adjustment of doors
12.2.18. Removal and installation of a gas-filled emphasis of a door of a back (Versatile person model)
12.2.19. Removal and installation of external door handles
12.2.20. Removal and installation of internal door handles
12.2.21. Removal and installation of door locks
12.2.22. Removal and installation of latches and locking wedges of a folding board
12.2.23. Removal and installation of an internal upholstery of door assemblies
12.2.24. Removal and installation of regulators of door window regulators
12.2.25. Removal and installation of window frames of door assemblies
12.2.26. Removal and installation of elements of a glazing of a body
12.2.27. Removal and installation of the panel of an upholstery of a cover of the top hatch
12.2.28. Removal and installation of a cover of the top hatch
12.2.29. Removal and installation of a cable of a drive of the top hatch
12.2.30. Removal and installation of a frame of the top hatch
12.2.31. Removal and installation of a sealing element of the top hatch and elements of its fastening
12.2.32. Removal and installation of a drainage trench of the top hatch
12.2.33. Removal, installation and adjustment of a vetrootboynik of the top hatch
12.3. Salon equipment
13. Onboard electric equipment
14. Schemes of electric connections


 









12-2-29-snyatie-i-ustanovka-trosa-privoda-verkhnego-lyuka.html

12.2.29. Removal and installation of a cable of a drive of the top hatch

Details installation of a cable of a drive of a cover of the top hatch (1 of 2)

1 — the Directing plate
2 — the Sliding holder

3 — the Directing tube

Details installation of a cable of a drive of a cover of the top hatch (2 of 2)

4 — the Directing element

5 — the Driving cable

 PERFORMANCE ORDER

  1. Remove an upholstery of a cover of the hatch (see. Section Removal and installation of the panel of an upholstery of a cover of the top hatch).
  2. To Otboltita directing plate (1) and, having pulled forward, liberate a cable from a directing tube (3).
  3. Press the button of transfer of the hatch in the cast-away situation and wait, while the cable (5) does not leave a reducer, - in case of need resort to an emergency method of a drive of the hatch (see. Section Governing bodies and salon equipment). If to liberate a cable it is not possible, it is necessary to disassemble the driving mechanism and to remove directing tube (3).
  4. Before installation grease the end of a new cable with suitable greasing (001 981 14 51). Track completeness of filling of a cable in directing tube (3), - the directing plate (4) should enter into a tube opening.
  5. Address for the help to experts HUNDRED Mercedes-Benzs for performance of procedure of base adjustment of a driving cable.
  6. Installation of the remained components is made as it should be, the return to an order of their dismantle.


«previous page
12.2.28. Removal and installation of a cover of the top hatch
following page»
12.2.30. Removal and installation of a frame of the top hatch