Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
12.1. Specifications
12.2. External equipment and body elements
12.2.1. Removal installation of levers of screen wipers
12.2.2. Removal of a drive of forward screen wipers
12.2.3. Removal and cowl installation
12.2.4. Removal and installation of the lock of a cowl
12.2.5. Removal and installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl
12.2.6. Removal and installation of a forward lattice
12.2.7. Removal and installation of covers of block headlights
12.2.8. Removal and installation of a boot of an impellent compartment of a complete set of AMG
12.2.9. Removal and installation of lateral steps
12.2.10. Removal and installation of bumpers
12.2.11. Removal and installation of door rear-view mirrors
12.2.12. Removal and installation of the tank of liquid of washing of glasses
12.2.13. Removal and installation of the holder of a spare wheel
12.2.14. Removal and installation of loker of protection of wheel arches
12.2.15. Removal and installation of panels of external furnish of racks And
12.2.16. Removal and installation of forward wings
12.2.17. Removal, installation and adjustment of doors
12.2.18. Removal and installation of a gas-filled emphasis of a door of a back (Versatile person model)
12.2.19. Removal and installation of external door handles
12.2.20. Removal and installation of internal door handles
12.2.21. Removal and installation of door locks
12.2.22. Removal and installation of latches and locking wedges of a folding board
12.2.23. Removal and installation of an internal upholstery of door assemblies
12.2.24. Removal and installation of regulators of door window regulators
12.2.25. Removal and installation of window frames of door assemblies
12.2.26. Removal and installation of elements of a glazing of a body
12.2.27. Removal and installation of the panel of an upholstery of a cover of the top hatch
12.2.28. Removal and installation of a cover of the top hatch
12.2.29. Removal and installation of a cable of a drive of the top hatch
12.2.30. Removal and installation of a frame of the top hatch
12.2.31. Removal and installation of a sealing element of the top hatch and elements of its fastening
12.2.32. Removal and installation of a drainage trench of the top hatch
12.2.33. Removal, installation and adjustment of a vetrootboynik of the top hatch
12.3. Salon equipment
13. Onboard electric equipment
14. Schemes of electric connections


 









12-2-21-snyatie-i-ustanovka-dvernykh-zamkov.html

12.2.21. Removal and installation of door locks

Forward doors

Details of installation of the lock of a forward door (1 of 4)

1 — the Cover

Details of installation of the lock of a forward door (2 of 4)

2 — Driving draft
3 — Draught of the internal handle

4 — Draught of the uniform lock

Details of installation of the lock of a forward door (3 of 4)

5 — Bolts

M14/6 — the Activator of the uniform lock (the left door)

Details of installation of the lock of a forward door (4 of 4)

7 — Fixing screws

8 — Zamkovaya assembly

 PERFORMANCE ORDER

  1. Remove an internal upholstery and an insulating film of a door (see. The section Removal and installation of an internal upholstery of door assemblies), - it is necessary to replace the damaged film.
  2. Remove a window frame (see. Section Removal and installation of window frames of door assemblies).
  3. Uncover (1) zamkovy assembly.
  4. Release a fastening clamp to the lock (8) drafts (3) internal handles and disconnect draft, - in case of need prepare a replaceable clamp.
  5. Disconnect from the lock (8) drafts (2 and 4), - the damaged clamps also are subject to replacement.
  6. Turn out fixing bolts (5) and remove the activator of the uniform lock (M14/6).
  7. Remove the external handle of a door (see. Section Removal and installation of external door handles).
  8. Turn out screws (7) and remove zamkovy assembly (8).
  9. Installation is made upside-down.

Back doors

Details of installation of the lock of a back door (1 of 4)

1 — the Cover

Details of installation of the lock of a back door (2 of 4)

2 — Driving draft
3 — Draught of the internal handle

4 — Draught of the uniform lock

Details of installation of the lock of a back door (3 of 4)

5 — Bolts
M14/8 — the Activator of the uniform lock (the left door)

M14/9 — the Activator of the uniform lock (the right door)

Details of installation of the lock of a back door (4 of 4)

7 — Fixing screws

8 — Zamkovaya assembly

The order of performance of procedure is similar described above for a forward door.

On models of the second option of execution do not forget to check a condition of a safety lock (5), - in case of need make its replacement.

Back door

Details of installation of the lock of a door of a back (1 of 3)

1 — Screws

Details of installation of the lock of a door of a back (2 of 3)

2 — Zamkovaya assembly

Details of installation of the lock of a door of a back (3 of 3)

2 — Zamkovaya assembly
3 — Draught of the uniform lock
4 — the Clamp

5 — the Safety lock
6 — Draught of the internal handle

 PERFORMANCE ORDER

  1. Remove an internal upholstery (see. Section Removal and installation of an internal upholstery of door assemblies).
  2. Remove the external handle (see. Section Removal and installation of external door handles).
  3. Remove the internal handle (see. Section Removal and installation of internal door handles).
  4. Remove the lock activator (see. Head Onboard electric equipment).
  5. Turn out fixing screws (1) and remove zamkovy assembly (2).
  6. Disconnect draft (3) activators of the uniform lock.
  7. Remove a clamp (4) and disconnect draft (6) internal handles.
  8. Installation is made upside-down. Do not forget to check a condition of a safety lock (5), in case of need make its replacement.

Folding board

Details of installation of the lock of a folding board (1 of 3)

1 — the Plastic tray
2 — the Plastic rivet

3 — Rasporny a pin

Details of installation of the lock of a folding board (2 of 3)

4 — the Clamp
5 — Draught of a drive of the activator
6, 14 — Levers
13 — Draught of a drive of a latch of the right lock

15 — the Fixing nut
M14/6 — the Activator of the uniform lock

Details of installation of the lock of a folding board (3 of 3)

7 — the Returnable spring
8 — Draught of a drive of a latch of the left lock
9 — the Latch of the left lock

10 — a draft Clamp
11 — the Carving plate
12 — Screws of fastening of a latch

 PERFORMANCE ORDER

  1. Open a back cover and a tool box in a folding board.
  2. Dismantle rivets (2 and 3) and take the plastic loose leaf (1).
  3. Remove a clamp (4) driving drafts (5) and disconnect the last from the lever 6/activator (M14/7).
  4. Turn out screws (12) and remove a carving plate (11). Having pulled in the arrow direction, liberate a latch (9) left locks from a door. Release a clamp (10) and finally remove a latch (9).
  5. Release a clamp and separate draft (13) from the lever (14).
  6. Give fixing nuts (15) and, having submitted down, remove zamkovy assembly assembled with a latch (8) and a sealing element.
  7. Installation is made upside-down, - track correctness of landing of laying.


«previous page
12.2.20. Removal and installation of internal door handles
following page»
12.2.22. Removal and installation of latches and locking wedges of a folding board