Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
12.1. Specifications
12.2. External equipment and body elements
12.2.1. Removal installation of levers of screen wipers
12.2.2. Removal of a drive of forward screen wipers
12.2.3. Removal and cowl installation
12.2.4. Removal and installation of the lock of a cowl
12.2.5. Removal and installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl
12.2.6. Removal and installation of a forward lattice
12.2.7. Removal and installation of covers of block headlights
12.2.8. Removal and installation of a boot of an impellent compartment of a complete set of AMG
12.2.9. Removal and installation of lateral steps
12.2.10. Removal and installation of bumpers
12.2.11. Removal and installation of door rear-view mirrors
12.2.12. Removal and installation of the tank of liquid of washing of glasses
12.2.13. Removal and installation of the holder of a spare wheel
12.2.14. Removal and installation of loker of protection of wheel arches
12.2.15. Removal and installation of panels of external furnish of racks And
12.2.16. Removal and installation of forward wings
12.2.17. Removal, installation and adjustment of doors
12.2.18. Removal and installation of a gas-filled emphasis of a door of a back (Versatile person model)
12.2.19. Removal and installation of external door handles
12.2.20. Removal and installation of internal door handles
12.2.21. Removal and installation of door locks
12.2.22. Removal and installation of latches and locking wedges of a folding board
12.2.23. Removal and installation of an internal upholstery of door assemblies
12.2.24. Removal and installation of regulators of door window regulators
12.2.25. Removal and installation of window frames of door assemblies
12.2.26. Removal and installation of elements of a glazing of a body
12.2.27. Removal and installation of the panel of an upholstery of a cover of the top hatch
12.2.28. Removal and installation of a cover of the top hatch
12.2.29. Removal and installation of a cable of a drive of the top hatch
12.2.30. Removal and installation of a frame of the top hatch
12.2.31. Removal and installation of a sealing element of the top hatch and elements of its fastening
12.2.32. Removal and installation of a drainage trench of the top hatch
12.2.33. Removal, installation and adjustment of a vetrootboynik of the top hatch
12.3. Salon equipment
13. Onboard electric equipment
14. Schemes of electric connections


 







12-2-1-snyatie-ustanovka-rychagov-stekloochistitelejj.html

12.2.1. Removal installation of levers of screen wipers

Removal installation of levers of screen wipers

Windscreen

Removal of the lever of a cleaner of a windscreen

1 — the Cover
2 — the Nut

3 — the Lever

 PERFORMANCE ORDER

  1. In order to avoid spontaneous operation of screen wipers on a signal of the sensor of a rain take a key from the ignition lock.
  2. Make sure that brushes are stopped in parking situation (horizontally, closely to bottom edge of a windscreen).
  3. Having combined, remove a protective cover (1), give a fixing nut (2) and by means of a suitable stripper remove the lever (3) screen wipers from a driving spindle, - try not to break a windscreen.
  4. Installation is made upside-down, - track, that the brush appeared in parking situation.

Back glass

 PERFORMANCE ORDER

  1. The order of removal/installation of the lever is similar described above for windscreen cleaners, - track, that the brush occupied the correct parking situation (horizontally, closely to the upper edge of back glass).

    1 — the Cover
    2 — the Nut
    3 — the Lever



«previous page
12.2. External equipment and body elements
following page»
12.2.2. Removal of a drive of forward screen wipers