|
12-2-12-snyatie-i-ustanovka-rezervuara-zhidkosti-omyvaniya-stekol.html
12.2.12. Removal and installation of the tank of liquid of washing of glasses
Details of installation of the tank of washing liquid (except models 463.323) (1 of 2)
Details of installation of the tank of washing liquid (except models 463.323) (2 of 2)
Details of installation of the tank of washing liquid (model 463.323)
|
|
- Remove a broad tank (except models 463.323), - the tank is located on models 463.323 in the left part of an impellent compartment.
- Remove a loker (2) protection of the corresponding wheel arch (see. Section Removal and installation of loker of protection of wheel arches).
- Remove the rezonatorny chamber of an air path with a catchment basin (see. Head of the Power supply system and production of the fulfilled gases) and, without disconnecting drainage hoses shift assembly aside (except models 463.323).
- Give a nut (3) bolts (9), disunite sockets of electroconducting of pumps (M5/1, M5/2 and M5/3) and the sensor of level of washing liquid (S42), release a binding of a hose (5) and remove the tank (8).
- Merge the liquid remains from the tank in the prepared capacity, then disconnect reception hoses of pumps, previously having marked them for the purpose of a guarantee of correctness of connection at assembly.
|
|
For a detachment of a hose (7) pumps of faroomyvatel (M5/2) release a collar (6). |
- Installation is made upside-down, - track correctness of landing of a sealing ring of a jellied mouth (4).
- In summary fill in in the tank washing liquid and check serviceability of its giving to nozzles of the corresponding washers.
|
|
|
|