|
12-2-4-snyatie-i-ustanovka-zamka-kapota.html
12.2.4. Removal and installation of the lock of a cowl
|
|
In total самоконтрящийся the fixture is subject to replacement without fail! |
Except models 463.333
Details of installation of the lock of a cowl (except models 463.333)
|
|
- Remove a forward lattice (see. Section Removal and installation of a forward lattice).
- Turn out bolts (1) in the top cross-section beam of a front (2), - slightly incline a beam back for the purpose of ensuring the best access to nuts from its bottom party.
- Disconnect from a beam (2) tire of grounding.
- Having released a cable clamp a drive of an otpuskaniye of a latch of the lock (5), remove a beam (2).
- Weaken the adjusting screw (6) and, having pulled, disconnect a cable (5) from zamkovy assembly (4).
- Release screws (3) and remove the lock (4).
- Installation is made upside-down, in case of need replace washers. Track, that the carving nipple (7) cables (5) provided the minimum free wheeling of a cowl.
|
|
Models 463.333
Details of installation of the lock of a cowl (model 463.333)
|
|
- Remove a forward lattice (see. Section Removal and installation of a forward lattice).
- Turn out bolts (5) in the top cross-section beam of a front (6) and remove the last, having liberated a cable from a clamp.
- Turn out bolts (1), - in case of need prepare replaceable washers.
- Disconnect a driving cable (2) and remove lock (3) assembly.
- Installation is made upside-down, - track, that marking in the form of an arrow on zamkovy assembly was turned to the left. A cable connect to the lock only after installation of the last.
|
|
|
|