|
12-2-3-snyatie-i-ustanovka-kapota.html
12.2.3. Removal and cowl installationTransfer of a cowl to vertical situation
Transfer of a cowl to vertical situation
|
|
- Having pulled for the lever (1) at the left under the dashboard, release a latch of the lock of a cowl, - the cowl will be slightly opened for length of a lock hook (2).
- Bypass the car in front, slightly raise a cowl and, having released a lock hook (2), completely lift a cover.
|
|
Previously make sure that brushes of screen wipers are pressed to a windscreen! |
- Screw-driver having wrung out the holder (3), separate a gas-filled emphasis (4) cowls from a spherical head, then cast away a cowl against the stop back, previously having enclosed under it something soft.
|
|
Removal and installation
Details of installation of a cowl (1 of 2)
Details of installation of a cowl (2 of 2)
Places of greasing of components of the lock of a cowl
|
|
- Disconnect electroconducting (3) from snuffled (4) supply of liquid of washing of a windscreen.
- Remove with snuffled (4) shtutserny sockets (5).
- Remove a hose (6) and burn down electroconductings (7) and liberate from a cowl their plugs through passage (8). Also remove intermediate clamps (9). Estimate a condition of plugs and clamps, in case of need prepare replaceable components.
- Disconnect the tire of grounding (10).
- Having asked the assistant to hold a cowl, turn out fixing screws (11).
- Installation is made upside-down. Do not forget to grease loops and zamkovy assembly.
- Make sure that the gap of landing of a cowl in a body aperture is identical on all perimeter, in case of need remove a forward lattice (see. The section Removal and installation of a forward lattice) also correct the provision of a latch so that its operation occurred to insignificant resistance.
- Check serviceability of functioning of stekloomyvatel.
|
|
|
|