|
12-2-33-snyatie-ustanovka-i-regulirovka-vetrootbojjnika-verkhnego-lyuka.html
12.2.33. Removal, installation and adjustment of a vetrootboynik of the top hatch
Details of installation of a vetrootboynik of the top hatch
|
|
- Open the hatch.
- Turn out fixing screws (1) and remove the chromeplated cross-piece (2).
- Remove clamping levels (5) from basic hubs (9) and delay them back, liberating edges of a vetrootboynik (6).
- Liberate a chipper (6) of the central support (7), having accurately hooked a screw-driver at the left and on the right, remove it from spindles assembled with support (8).
- Installation is made upside-down.
- Make sure of serviceability of functioning of a vetrootboynik, - if it at an ubiraniye hits about a cover the hatch, correct element landing by means of adjusting Vit (shooter).
- If functioning of a vetrootboynik (6) is accompanied by a jingling sound, it is necessary to liberate it from the central support (7), pressing thus around an arrangement of lateral support (8), slightly to turn in and latch into place.
- In summary make sure of serviceability of functioning of a vetrootboynik during a test trip with a speed not less than 100 km/h. In case of need repeat adjustment procedure.
|
|
|
|