Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
12.1. Specifications
12.2. External equipment and body elements
12.2.1. Removal installation of levers of screen wipers
12.2.2. Removal of a drive of forward screen wipers
12.2.3. Removal and cowl installation
12.2.4. Removal and installation of the lock of a cowl
12.2.5. Removal and installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl
12.2.6. Removal and installation of a forward lattice
12.2.7. Removal and installation of covers of block headlights
12.2.8. Removal and installation of a boot of an impellent compartment of a complete set of AMG
12.2.9. Removal and installation of lateral steps
12.2.10. Removal and installation of bumpers
12.2.11. Removal and installation of door rear-view mirrors
12.2.12. Removal and installation of the tank of liquid of washing of glasses
12.2.13. Removal and installation of the holder of a spare wheel
12.2.14. Removal and installation of loker of protection of wheel arches
12.2.15. Removal and installation of panels of external furnish of racks And
12.2.16. Removal and installation of forward wings
12.2.17. Removal, installation and adjustment of doors
12.2.18. Removal and installation of a gas-filled emphasis of a door of a back (Versatile person model)
12.2.19. Removal and installation of external door handles
12.2.20. Removal and installation of internal door handles
12.2.21. Removal and installation of door locks
12.2.22. Removal and installation of latches and locking wedges of a folding board
12.2.23. Removal and installation of an internal upholstery of door assemblies
12.2.24. Removal and installation of regulators of door window regulators
12.2.25. Removal and installation of window frames of door assemblies
12.2.26. Removal and installation of elements of a glazing of a body
12.2.27. Removal and installation of the panel of an upholstery of a cover of the top hatch
12.2.28. Removal and installation of a cover of the top hatch
12.2.29. Removal and installation of a cable of a drive of the top hatch
12.2.30. Removal and installation of a frame of the top hatch
12.2.31. Removal and installation of a sealing element of the top hatch and elements of its fastening
12.2.32. Removal and installation of a drainage trench of the top hatch
12.2.33. Removal, installation and adjustment of a vetrootboynik of the top hatch
12.3. Salon equipment
13. Onboard electric equipment
14. Schemes of electric connections


 


12-2-22-snyatie-i-ustanovka-zashhelok-i-zapornykh-klinev-otkidnogo-borta.html

12.2.22. Removal and installation of latches and locking wedges of a folding board

Details of installation of a latch of the lock of a folding board on the Cabriolet models

4 — a latch Bolt
5 — the Carving plate

6 — the Fixing nut
7 — Driving draft

Details of installation of a locking wedge of the lock of a folding board on the Cabriolet models

8 — the Locking wedge
9 — the Fixing bolt

10 — the Emphasis

 PERFORMANCE ORDER

  1. Open a back board.
  2. Open a cover of a tool compartment.
  3. Take rivets (2 and 3), remove the loose leaf (1) tool compartment (see paragraph 2 in the Section Removal and installation of door locks).
  4. Turn out a bolt (4) and remove a latch (6), - the carving plate (5) will fail in a board frame.
  5. Turn out fixing bolts (9) and remove a locking wedge (8) and an emphasis (10).
  6. Installation is made upside-down.
  7. In summary adjust a board (see. Section Removal, installation and adjustment of doors).

«previous page
12.2.21. Removal and installation of door locks		 following page»
12.2.23. Removal and installation of an internal upholstery of door assemblies