2-3-3-organy-upravleniya-i-oborudovanie-salona.html

2.3.3. Governing bodies and salon equipment

Switches and the governing bodies located on a steering column and a steering wheel

Combined podrulevy the switch

Switching of modes of functioning of headlights, alarm system driving beam

By means of the podrulevy switch transfer of head headlights from a mode of a passing beam in a mode of a driving beam can be made, - wring out the lever from itself, - automatically on an instrument guard the corresponding control lamp of a characteristic dark blue luminescence (should light up see. Section Combination of devices, measuring instruments, control lamps and light indicators). For shutdown of a driving beam return the lever to a starting position.

Switching of modes of functioning of headlights

Alarm system possibility is provided by a driving beam also: the alarm system is carried out by procrastination of the lever of the podrulevy switch on itself and irrespective of chosen position of the handle of a choice of a mode of functioning of external lighting devices (see below).

The alarm system can be made by a driving beam even at the switched-off ignition.

Activation of indexes of turns

Activation of indexes of turns is made by an otzhimaniye of the lever of the podrulevy switch in the corresponding direction. The lever is transferred up or down, to dependences of the chosen direction of a change of course.

Activation of indexes of turns

When translating the lever in extreme (before click) the top/bottom situation the corresponding indexes of turns will continue to function until the steering wheel will not be returned in rectilinear situation (will work the terminal switch) or while the lever will not be compulsorily returned in neutral situation.

Short-term inclusion of indexes, for example, at intention to replace a ryadnost of movement is made by easy procrastination of the lever up or down.

Management of functioning of cleaners/washers of a windscreen

Management of functioning of cleaners/washers of a windscreen

The choice of a mode of functioning of screen wipers is made by rotation of the rotary handle of the lever of the switch:

0: Vykl

I: An interval mode (duration of a pause is defined by indications of the sensor of a rain, at a stop of the car and opening of a forward door movement of screen wipers stops for the purpose of prevention of hit of brushed-away moisture on clothes of the driver/passenger leaving salon)

II: Normal high-speed continuous mode of movement of screen wipers

III: A high-speed continuous mode of movement of screen wipers (at a stop of the car there is an automatic switching in a normal mode)

Single operation of screen wipers can be made by a way of short pressing the switch handle.

Activation of supply of washing liquid is made by pressing the switch (1) handle with overcoming of a point of resistance, - supply of washing liquid is accompanied by several waves of brushes of screen wipers.

At a full stop of the car and open for one of forward doors the interval mode of functioning of screen wipers stops that allows to prevent hit of moisture brushed away by brushes on clothes entering into salon or leaving the car of the driver/passenger.

Podruleva switch of management of functioning темпостата / systems of variable restriction of speed of Speedtronic

The lever switch of management темпостата is located with functioning on a steering column above the combined podrulevy switch (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column).

The detailed description of principles of management темпостата is provided by functioning in the Section of the Control system in the speed (Tempostat/Speedtronic).

Switch of adjustment of provision/heating of a steering wheel

Situation adjustment

The lever switch of adjustment of provision of a steering wheel is located at the left on a steering column below the combined podrulevy switch (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column). Adjustment can be made within 30 more minutes after key extraction from the ignition lock provided that the driver's door is open.

Include ignition, or open a driver's door.

Adjustment of length of a column is carried out by отжимания / lever procrastination forward/back. For adjustment of height of provision of a steering wheel the lever should be displaced up or down in the vertical plane.

Adjustment of provision of a steering wheel

The chosen provision of a steering wheel is brought in memory of the processor at the same time with storing of provision of a driver's seat.

Heating

The rotary handle of activation of heating of a steering wheel equipped with the built in control lamp is located on the end of the lever. Povorachivaniye in the direction of an arrow (1) leads handles to activation built in in the segments of a rim of a steering wheel of heating elements upholstered with skin, - the control light-emitting diode (3) is at the same time activated. For shutdown of heating turn the handle in an opposite direction.

Automatic shutdown of heating of a steering wheel in its electric circuit is not put.

Activation/deactivation of heating of a steering wheel

Podruleva switch of management of Linguatronic system functioning

The lever switch of management is located with Linguatronic system functioning (voice-activated control by certain functions of comfort) on the right on a steering column (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column).

Voice-activated control is made in German, the description of a principle of action of system is provided in the separate management.

Button of activation of a horn

The button of inclusion of a sound signal is built in a stupichny part of a steering wheel (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column).

Control panels onboard computers/volume controls of sounding of an audiosystem

Control panels are built in on each side a stupichny part of a steering wheel and equipped with push-button switches of a choice of modes and switchings of functions of onboard computer/management by an audiosystem (see an illustration the Scheme of an arrangement of components of management on a multipurpose steering wheel). For more details see below.

Switches and the governing bodies located on the dashboard

Left panel of switches

Group of switches of adjustment of door rear-view mirrors

External rear-view mirrors have the spherical design, allowing to expand a review field.

Heating of mirrors works automatically depending on temperature of external air.

Function of automatic blackout of rear-view mirrors (both external, and internal) is provided also at hit of light of headlights of other transport participating means of traffic on built in in assemblies of mirrors sensors (ignition should be included).

Blackout of mirrors is not activated at included illumination of salon, and also at a choice of a reverse gear of AT («R»).

The group of three switches of adjustment of external rear-view mirrors is located in the left top corner of the panel. Adjustment is made by means of the rotor managing director of the switch, is direct under which two push-button switches of a choice of a mirror subject to adjustment take place.

Adjustment of door rear-view mirrors

Record in memory of the processor of the chosen provision of rear-view mirrors is made at the same time with record of parameters of adjustment of forward seats.

The design of system allows to carry out record of parking provision of a rear-view mirror of the right door. Park the car motionlessly at edge of a pavement and leave ignition included. Make sure that in installations of the board computer («ON») the corresponding function (the MIRROR SETTING WHEN PARKING function in the CONVENIENCE submenu) is activated (see below), adjust a mirror of the right door so that in it the bordyurny stone and a back wheel of the car was reflected, then press the button of the appeal to memory of the processor and approximately for 3 seconds wring out down the rotor switch of management of the electric drive of mirrors, - the mirror should not measure the situation, otherwise procedure should be repeated. Now before a parking of the car will enough start to include transfer of a backing («R») and to press the corresponding button of the selector switch of adjustment of the right door mirror. Return of a mirror to a starting position occurs automatically approximately in 10 seconds after switching off of transfer of a backing, at achievement by speed of movement of value in 10 km/h, and also at a nazhimaniye on the selector switch of activation of the electric drive of the right door mirror.

Switch of faroomyvatel

The push-button switch of activation of faroomyvatel is located in the right top corner of the left panel of switches. By short pressing the button lenses of head headlights under a high pressure the liquid stream for washing of glasses moves.

Switch of activation of faroomyvatel (1)

Switch of a choice of a mode of functioning of external lighting devices

The rotary handle of the switch is located in the lower part of the left panel of switches. By means of the switch. the choice of one of the following modes of functioning of external lighting devices can be made:

Switch of a choice of a mode of functioning of external lighting devices

— Lighting devices are switched off. If in the board computer installation of activation of a mode of running fires of light time of day (DRL) is chosen, start of the engine will lead to automatic activation of running fires (dimensions, a passing beam, illumination of registration plate).

In the countries where activation of DRL is accepted legislatively, shutdown of this function should not be made!

— An automatic choice of a mode of functioning of lighting devices depending on an illumination condition: marker lights will be activated in position 1 of the ignition key, a passing beam of headlights and illumination of registration plate – at the started engine.

Car dazzle by light of headlights of counter participants of movement can lead to short-term shutdown of lighting in view of what at movement in a night-time the automatic mode should not be used! Remember also that activation of antifog lighting in an automatic mode is not made!

— Activation of marker lights, lamps of illumination of registration plate and illumination of devices.

— Activation near/distant, - depending on chosen position of the podrulevy combined switch (see above), - light of headlights.

— Activation of parking fires of the right board of the car.

— Activation of parking fires of the left board of the car.

For activation of fog lights it is necessary to turn the handle in the provision of a passing beam () and to delay it on itself before the first fixed situation, - to the left of the switch the top green light indicator should light up. Handle procrastination before the second fixed situation allows to activate also back foggy lamp, - to the left of the switch the top yellow light indicator should light up.

Delay of switching off of external lighting

After engine switching off in a night-time the following external lighting devices continue to burn:

• Marker lights;
• Illumination of registration plate;
• Fog lights.

When opening and the subsequent closing of a door the board computer begins a countdown of the chosen delay. After this time lighting is switched off.

Within the next ten minutes this function can be activated repeatedly for what it is enough to open any of doors. If after engine switching off any of doors is not open or closed, final shutdown of external lighting will occur in 15 ÷ 60 seconds (depending on the installations entered through the menus of the board computer).

For temporary deactivation of function it is necessary to turn after switching off of the engine a key in the ignition lock in situation 0, then in situation 2, then again in situation 0. At the following start of the engine function is again automatically activated.

Onboard illumination

At the included function of onboard illumination car unlocking from the DU panel of the uniform lock in a night-time leads to activation of the following lighting devices:

• Marker lights;
• Illumination of registration plate;
• Fog lights;
• The repeaters built in in door mirrors.

Shutdown of illumination occurs automatically when opening a driver's door (except the repeaters built in in mirrors), at ignition inclusion, and also on the timer at most 40 seconds later. Opening of any of forward doors leads to deactivation only the repeater of the mirror with the same name.

Regulator of an inclination of optical axes of headlights

The rotary handle of the switch of adjustment of an inclination of optical axes of headlights is located in the left part of the dashboard in close proximity to a steering column (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column) and has six fixed situation (0, 1, 2, 3, 4 and 5).

Regulator of an inclination of optical axes of headlights

The switch serves for adjustment of extent of a zone of lighting by a passing beam of headlights for the purpose of prevention of dazzle of drivers of passers, and also ahead of going vehicles.

The regulator should be established in the situation corresponding to number of passengers and extent of loading of the car (see. Specifications).

Switch ignition/lock of blocking of a steering column

The lock of ignition is located on the dashboard, to the right of a steering column (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column). The key can occupy one of four fixed positions in the lock:

0: Extraction key/blocking of a steering column

1: Auxiliary consumers of the electric power (lay situation)

2: Ignition is included / Movement

3: Engine start

Situation 0 - blocking of a steering column

The key can be entered into the lock or is taken from it only in this situation. At ignition key turn from situation 0 in situation 1 there is an unblocking of a steering column. Besides, to additional to conditions of permission of extraction of a key obligatory transfer of the lever of the AT selector to the situation "R" and otpuskany pedals of a foot brake belong.

Blocking the helmsman of a column is carried out automatically in attempt to turn a steering wheel after key extraction from the ignition lock.

Blocking the helmsman of a column sometimes brings impossibility to turn a key in the ignition lock. In such situation it is necessary to turn slightly a steering wheel in this or that party (for the purpose of loading removal), at the same time turning a key in the lock.

At all do not take a key from the ignition lock during movement, is will inevitably lead to blocking of a steering column and control loss over management!. Take out a key from the lock only after a full stop of the car!

Possibility of adjustment of seats and the helmsman of a column at an open forward door remains during about half an hour more after key extraction from the ignition lock.

Situation 1 - lay

In this provision of a key possibility of functioning of auxiliary consumers of the electric power (an audiosystem, the lighter, the heater fan, screen wipers, etc.) is provided.

Situation 2 - ignition is included / movement

The ignition key is in this situation constantly during car movement, and also at operation of the engine on single turns. On diesel models key turn in situation 2 before start of the engine leads to activation of system of preheat. An electric food of all systems and the additional equipment established on the car is at the same time provided. At key turn from situation 1 situation 2 quickly joins some from located on an instrument guard of the car of control lamps, confirming serviceability of functioning of the relevant systems (see. Section Combination of devices, measuring instruments, control lamps and light indicators).

Situation 3 - start

At key turn in this situation there is a starter inclusion. After implementation of start of the engine the key should be released, and it will automatically return to situation 2.

Lever of an otpuskaniye of a latch of the lock of a cowl

The lever of an otpuskaniye of the lock of a cowl is located under the dashboard to the left of a steering column and is painted in red color.

Switches of blocking of differentials

The group of switches of blocking of differentials is located in the central part of the dashboard over its console section between deflectors of the central air lines of systems of heating/ventilation of salon. Under switches yellow control light-emitting diodes of inclusion of blocking, from above - red light indicators of functioning of blocking (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column) are located.

Group of switches of blocking of differentials

The design of the transmission line allows to carry out blocking of three differentials in total: interaxal differential in a transfer case and two interwheel differentials (in assemblies of both of bridges).

Blocking can be carried out only in sequence 1 —› 2 —› 3!

Blocking of differentials allows to optimize transfer of traction effort in cross-country conditions when overcoming water barriers, and also at movement on snow-covered and silt ice-covered the route. Blocking of differentials also allows to disconnect functioning of ABS and ESP systems in cross-country conditions. Getting under way from a place with the blocked differentials try not to squeeze out a gas pedal sharply.

Blocking of interwheel differential of the forward bridge essentially reduces controllability of the car when passing abrupt turns!

To resort to blocking follows only at the minimum speeds of movement and in a case. Inclusion of blocking should be made only on the motionless car.

Blocking of interaxal differential

Inclusion of blocking is made by pressing the lower part of the push-button switch (1) - the yellow control light-emitting diode from below should light up, and in a combination of devices the control lamp 4-ETS/ESP (is activated see. Section Combination of devices, measuring instruments, control lamps and light indicators). At the same time on the screen of the multipurpose display the prevention of shutdown of ABS («ABS NOT AVAILABLE LOCK SELECTED») is deduced. The red control light-emitting diode over the button of the switch works after the completion of process of blocking of differential, - on a combination of devices control lamps will be activated and, - on the screen of the display «DIFFERENTIAL LOCK» message (The differential is blocked) will be highlighted.

Activation of blocking of differential leads to automatic shutdown of ABS, ESP and BAS systems!

After completion of process of blocking of interaxal differential consecutive blocking of interwheel differentials at first back, then the forward bridge (see below) can be made.

Blocking of interwheel differentials

Blocking of interwheel differentials is made by means of individual switches (2) and (3), - at first under the corresponding switch the yellow control light-emitting diode, then (on termination of blocking process) red from above lights up.

Switching off of blocking of differentials

For blocking shutdown rather repeatedly to press the button of the corresponding switch.

Shutdown of blocking of differentials should be made as it should be, the return to an order of their inclusion, i.e.: 3 — ›2 —› 1!

Simultaneous shutdown of blocking of all differentials can be made by a nazhimaniye way on the switch (1) button.

Control light-emitting diodes should go out. Approximately in three seconds of movement in a usual mode there is an automatic activation of ESP, BAS and ABS systems (control lamps and will go out), «DIFFERENTIAL LOCK» message also should disappear from the screen of the multipurpose display.

If after performance of procedure of shutdown of blocking red control light-emitting diodes over switches do not die away, it is necessary to change slightly insignificant turn of a steering wheel the direction of movement of the car, - try not to create emergencies on the road.

Switches of console section of the dashboard

Switch of the alarm system

Turning on of the alarm system is made by means of the button located on the center in the top part of console section of the dashboard (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard). The button of the switch is standardly equipped with the built-in alarm lamp with the pictogram representing two triangles entered each other.

Switch of the alarm system

Turning on of the alarm system leads to simultaneous operation of all four indexes of turns (and their light indicators on a combination of devices of the car). The alarm system is intended for the prevention of other participants of traffic of the compelled stop of the car and is used also in other dangerous situations provided by traffic regulations. For shutdown of the alarm system it is necessary to press the switch button repeatedly.

Activation of the alarm system is made automatically at operation any of safety cushions.

Left top group of switches

The left top group of switches of console section of the dashboard includes switches of activation of heating of a driver's seat, activation of a cleaner/washer of back glass and shutdown of protivozanosny system (ESP) (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard).

Switches of activation of heating of a driver's seat

Buttons of a choice of modes of functioning of heating elements of a driver's seat are built in in the left part of the left top group of switches of console section of the dashboard (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard). The principle of activation/deactivation of heating is similar described below for a forward passenger seat.

Switches of activation of a cleaner/washer of back glass

Two located one over other button of activation of a cleaner and supply of washing liquid are located in the central part of the left top group of switches (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard). Make sure that ignition is included. For screen wiper start in an interval mode press the top push-button switch (1), - the control light-emitting diode (2) should light up built in in the panel between buttons of switches. Shutdown of a screen wiper is made by repeated pressing the same button, - the light-emitting diode should go out.

Switches of activation of a cleaner/washer of back glass

The pressing the bottom push-button switch (3) makes activation of the pump of supply of washing liquid on back glass (with simultaneous start-up of a screen wiper), - after the button will be released supply of liquid will stop, and the screen wiper will continue functioning within about five more seconds.

Switch of protivozanosny system (ESP)

The switch of protivozanosny system (ESP) is located in the central part of the bottom number of switches of console section of the dashboard (see an illustration the Scheme of an arrangement of components of management on a multipurpose steering wheel). Need for shutdown of ESP system can arise at movement with antisliding chains, on deep snow, sand or gravel. Thus the torque of the engine ceases to be supervised and pro-slipping of driving wheels can have milling impact on soil.

For shutdown of ESP press the top part of a key of the switch, - on a combination of devices the corresponding control lamp (should light up see. Section Combination of devices, measuring instruments, control lamps and light indicators).

Switch of shutdown of protivozanosny system (ESP)

For return to a normal mode of movement it is enough to press the lower part of a key.

Right-wing top group of switches

The left top group of switches of console section of the dashboard includes switches of activation of the uniform lock, systems of protection against towage and ultrasonic scanning of internal volume, and also heating of the right forward seat (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard).

Switch of activation of the uniform lock

Possibility of management by functioning of activators of locks by means of the keyboard switch which has been built in in the right top corner of console section of the dashboard (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard) is provided.

The stationary switch of the uniform lock is located on the panel of the central console of the car

Switches of activation of special modes of the anticreeping alarm system (protection against towage and ultrasonic scanning of salon)

Location of a control light-emitting diode of activation of anticreeping system and switches of special modes of anticreeping system (see also illustration the Switch of the alarm system)

1 — the Switch of a mode of protection against towage 2 — the Control light-emitting diode	3 — the Switch of ultrasonic control of internal volume

Switches of activation of heating of the right forward seat

Buttons of a choice of modes of functioning of heating elements of the right forward seat are built in in the right part of the right-wing top group of switches of console section of the dashboard (see an illustration the Scheme of an arrangement of components of management on console section of the dashboard).

Make sure that ignition is included.

By means of the top button the mode of normal heating is activated, - one red control light-emitting diode burns. The bottom button serves for activation of the accelerated heating of a seat, - both red control light-emitting diodes burn.

Switches of modes of heating of seats

1 — Normal heating	2 — the Accelerated heating

For shutdown of heating press the top button until both control light-emitting diodes will not go out.

Shutdown of heating of seats occurs also at an overload of system of a charge or insufficient level of a charge of the storage battery, - in this situation one or both control diodes (depending on the heating chosen a mode) will be switched in a flashing mode. After overload removal (shutdown of superfluous consumers of the electric power) heating of seats will be automatically activated.

Control panel functioning of central air of air

See. Section of the Device of ensuring comfort.

The control panel audiosystem functioning / the combined audio-and telephone and navigation system COMAND

See the operation manual on the car.

Switches and the governing bodies located on the central console

On the central console of the car such governing bodies, as levers of the AT selector and raising of the parking brake, and also switches of management of functioning of system of heating/ventilation of independent action, an additional heater (diesel models) and switchings of modes of a transfer case (see an illustration the Scheme of an arrangement of components of management of AT on the central console) settle down.

AT selector lever

See. Section Start of motion and switching of automatic transmission.

Switch of management of functioning of system of heating/ventilation of salon of independent action

See. Part of the Device of ensuring comfort.

Switch of management of functioning of an additional heater.

Location of the keyboard switch of an additional heater on assembly of the central console of the car (only diesel models)

Switch of modes of a transfer case

The transfer case is equipped with the two-level reducer providing conditions for movement both in normal conditions (mode "N"), and in cross-country conditions (mode "L"). Possibility of a blackout of transfer of traction effort to wheels of both bridges of the car (mode "N") is provided also. In both operating modes of a reducer (and «L») the drive is carried out by "N" on wheels of both leading bridges. Thus in a mode "L" the reducer of a transfer case provides transfer on driving wheels of the car of the raised torque, practically doubling the transfer relation.

Do not forget that the increase in traction effort at the expense of increase of the transfer relation is always interfaced to inversely proportional reduction of speed of movement of a vehicle!

Switch of modes of a transfer case

The keyboard switch of modes of a transfer case is located at the left on the slanted back panel of the central console of the car. Activation of a lowering mode should be made at the working engine established in the situation "N" the lever of the AT selector and for the speed of movement no more than 40 km/h. Press top («LOW») a part of a key, - the reducer of a transfer case should be switched to lowering transfer that is accompanied by highlighting of a letter of "L" in the corresponding field of base page of the multipurpose display of the board computer (see. Section Combination of devices, measuring instruments, control lamps and light indicators).

For return to a mode of normal movement (a mode of raising transfer) it is necessary to press bottom («HIGH») of a key (the engine should work, AT is transferred to neutral situation, and speed of movement of the car to make not less than 70 km/h), - in the corresponding field of base page of the multipurpose display of the board computer (see. The section the Combination of devices, measuring instruments, control lamps and light indicators) should be highlighted a letter of "N".

At unsuccessful switching on the screen of the multipurpose display of the board computer one of the following messages is deduced:

• «TC SHIFT CONDITIONS NOT FULFILLED» (Conditions of switching of a transfer case are not executed), - is not satisfied one or several conditions of switching;
• «TC IN NEUTRAL» (The Transfer case is transferred to neutral situation), - process of switching was interrupted, and the reducer of a transfer case is switched in neutral situation;
• «TC SHIFT ABORTED» (Process of switching of a reducer is interrupted), - switching is not executed.

Repeat attempt.

For transfer of a reducer of a transfer case to the neutral situation "N" stop the car, turn the ignition key in situation 0 and strongly cock the parking brake. Further, squeeze out a pedal of a foot brake, transfer the AT selector lever to the situation "N", then turn a key in the ignition lock in situation 1, press any part («LOW» or «HIGH») the keyboard switch of modes. At successful switching in the corresponding field of base page of the multipurpose display (see. The section the Combination of devices, measuring instruments, control lamps and light indicators) will be highlighted «N» letter, besides on the screen is deduced «TC IN NEUTRAL» message (The Transfer case is in neutral situation).

Opening of a driver's door of the car at left in the ignition lock a key and the transfer case transferred to the situation "N" leads to operation of an alarm buzzer!

The switches located on door panels

On lateral panels of forward doors are located the switch of adjustment of provision of forward seats, in armrests assemblies of switches of management by functioning of the electric drive of window regulators are built in.

Switches of assemblies of forward doors (on an example driver's)

1 — the Main panel of switches of management of functioning of the electric drive of window regulators 2 — Group of switches of adjustment of provision of a driver's seat	4 — input Buttons in memory and a call from memory of parameters of adjustment driver's the seat/helmsman of a column / door rear-view mirrors 3 — the Internal handle of a door

Group of switches of adjustment of provision of seats/appeal to memory of the processor

The design of the electric drive allows to make flexible adjustments to five parameters of a seat, - use the corresponding section of the switch

Entering buttons in a memory/call of parameters of adjustment of seats

Switches of adjustment of provision of forward seats are located on lateral panels of forward doors. Functioning of the electric drive possibly only in positions 1 and 2 of the lock of ignition (on some models also in situation 0 at open any of forward doors).

Switches of management of functioning of the electric drive of door window regulators

Individual switches of management are located functioning of window regulators on each of lateral doors of the car.

In an armrest of a driver's door the main panel of the centralized management is built in by the electric drive of window regulators of all doors.

The main panel of switches of the centralized management of functioning of door window regulators

Each of switches of the main panel allows to activate a drive of a regulator of a window regulator of the corresponding door. Placed in the panel center the polzunkovy switch by shift it to the right before emergence of a symbol allows to block in case of need possibility of activation of regulators of window regulators of back doors from individual door switches, - the pictogram about the image of the little man should open.

For lowering / поднимания glasses it is necessary to wring out slightly the button of the corresponding switch in the necessary direction, - the otpuskaniye of the button will lead to a glass stop. Otzhimaniye of the switch with overcoming of a point of resistance leads to automatic lowering / подниманию glasses of the corresponding door.

If at transfer to the top situation glass encounters resistance, the electric drive of a regulator is immediately blocked, thus glass falls down a little, and further keeping of the pressed top part of a key will lead only to glass lowering in the bottom situation.

Possibility of lowering and podnimaniye of door glasses from the DU panel of the uniform lock is provided also.

Switches and the governing bodies located on the ceiling console and salon a rear-view mirror

The scheme of an arrangement of switches on the ceiling console and assembly of a salonny rear-view mirror

Button of an emergency call of TELE AID system

The button is intended for an emergency communication with the dispatcher of a regional rescue service.

Information on activation and deactivation of a service mode of TELE AID system is provided in the Part of the Device of ensuring comfort.

Switch of illumination of a luggage compartment

Illumination of a luggage compartment is made by means of built in in a back part of the ceiling console of the push-button switch (2). The scheme of an arrangement of back lamps is provided below (see an illustration Back salonny lamps are equipped with three-position polzunkovy switches). On the Versatile person models illumination of a luggage compartment is activated automatically when opening a door of a back, thus its shutdown from the console switch is not obviously possible. In order to avoid a podsadka of the storage battery at long leaving of a door of a back of the open it is necessary to make shutdown of lamps: press the button of the zamkovy cylinder of the external handle of an open back door, then lower down a latch tag. Removal of blocking is made by repeated pressing the button of the zamkovy cylinder.

In order to avoid damage of the lock do not try to slam a back door at the lowered tag of a latch!

Order of shutdown of illumination of a luggage compartment at an open door of a back on the Versatile person models

1 — the Button of the cylinder of the lock	2 — a latch Tag

Switches of the directed individual lamps of forward places

Two push-button switches (3 and 9) (see an illustration the Scheme of an arrangement of switches on the ceiling console and assembly of a salonny rear-view mirror) are located on each side the ceiling console and serve for activation of the lateral directed lamps providing individual illumination of places of the driver and the forward passenger.

Switch of a choice of a mode of functioning of the main salonny lighting

The keyboard switch (8), built in in a forward part of the ceiling console (see an illustration the Scheme of an arrangement of switches on the ceiling console and assembly of a salonny rear-view mirror), has three fixed situation, allowing to carry out a choice of one of three modes of functioning of the main salonny lighting.

Mode of automatic activation of salonny lighting

At switch installation in average situation salon illumination (without a luggage compartment) is activated automatically in a night-time in the following cases:

• When unlocking door locks;
• At key extraction from the ignition lock;
• When opening doors, - opening of forward doors leads to activation only forward salonny lamps, back - only back, inclusion of door illumination is in addition made.

Closing of doors at taken of the ignition lock a key leads to the slowed-down shutdown of lamps. For instant shutdown of lamps it is enough to insert a key into the ignition lock.

Function of the slowed-down shutdown of salonny lighting at will of the owner of the car can be disconnected through system of the menu of the multipurpose display of the board computer.

Manual control

In case of need automatically activated lamps can be switched compulsorily off by a nazhimaniye way on the right part of a key of the switch, marked with a symbol.

In pressing the left part of a key marked with a symbol, it is possible to activate compulsorily salonny lighting even behind closed doors, - for return to an automatic mode transfer a key to average situation.

Remember that function of automatic shutdown does not extend on the directed lamps of individual lighting, - do not forget to disconnect after use them manually (see above, - forward lamps, - and below, - back).

Switch of management of functioning of the top elevating and movable hatch (Versatile person model) / folding top (Cabriolet model)

The managing director keyboard ползунковый the switch (4) is located in the central part of the ceiling console (see an illustration the Scheme of an arrangement of switches on the ceiling console and assembly of a salonny rear-view mirror).

The Versatile person models with the elevating and movable top hatch

Regular management (from the console switch)

For moving of a cover of the hatch wring out the switch in the direction of arrows (1 or 2).

Otzhimaniye of the switch with overcoming of a point of resistance allows to make machine translation of a cover of the hatch in the relevant extreme situation.

Principle of use of the switch of management of functioning of the electric drive of the elevating and movable top hatch on as appropriate completed Versatile person models

Podnimaniye and lowering of a cover is made by a switch otzhimaniye in the direction of arrows (3 and 4). The functioning principle the same, as when moving, i.e. at a weak otzhimaniye of the switch a cover will move until the key keeps pressed, for automatic transfer of a cover to extreme provisions it is necessary to wring out the switch in the relevant party with overcoming of a point of resistance.

At failure of the electric drive closing of a cover of the top hatch to be made manually (see below)

Emergency closing of a cover of the top hatch

The mechanism of a manual drive of the top hatch is located under the panel of furnish of the left back rack in a luggage compartment of the car.

The mechanism of a mechanical drive of emergency closing of a cover of the top hatch is under the left back panel of an upholstery of a luggage compartment

1 — a doorway Sealant	2 — the upholstery Panel

Open a back door, remove a sealant from the relevant party of a doorway and the panel of furnish of the left back rack.

On the models equipped with additional ware compartments it is necessary to turn out previously screws of fastening of back facing of an additional compartment.

Take from a set of the onboard tool a face key, plant it on a power shaft of the mechanism and start to rotate by means of a screw-driver in the relevant party.

Activation of the mechanism of a manual drive of the top hatch is made by means of a face key from a set onboard

The Cabriolet models with folding top

At поднимании / lowering of folding top pay attention to the next moments:

• In the omitted situation the protective cover should will completely clasp;
• During lowering / поднимания folding top there should be a sufficient free space for roof moving;
• Check, that the height of the cargo laid in a luggage compartment did not exceed level of regular provision of a protective cover, - the luggage should not rest against a cover;
• From above on a protective cover of a luggage compartment no subjects should be laid;
• On a roof of the car the top luggage carrier should not be mounted;
• Lowering of the polluted or wet folding top is inadmissible;
• In order to avoid damage of a material of a roof it is not necessary to lower folding top at air temperature below - 15°С;
• Before lowering / подниманием roofs should be parked the car in the most approximate to horizontal situation.

Regular management (from the console switch)

Lowering

Make sure that zippers and angular locks of a back folding board are reliably fixed.

Transfer the AT selector lever to the situation "R".

Cock the parking brake.

Make sure that ignition is included.

For an otpuskaniye of blocking of folding top it is necessary to turn down two blocking levers located under sun-protection peaks (1 and 2)

Lower sun-protection peaks and develop in specified by shooters of the direction two located under them blocking the lever, - the alarm buzzer confirming the fact of an otpuskaniye of clamps of a roof should be activated.

Principle of functioning of the switch of management of the electric drive of folding top

Wring out in the arrow (3) direction the polzunkovy switch on the ceiling panel and keep it in this situation until there will be the shutdown of an alarm buzzer confirming the completion of process of lowering of a roof.

Return to a starting position the blocking levers located under sun-protection peaks.

Podnimaniye

Transfer the AT selector lever to the situation "R".

Cock the parking brake.

Make sure that ignition is included.

Lower sun-protection peaks and develop in specified by shooters of the direction two located under them blocking the lever, - the alarm buzzer confirming the fact of an otpuskaniye of clamps of a roof should be activated.

Wring out in the arrow (4) direction the polzunkovy switch on the ceiling panel and keep it in this situation until the edge of folding top will not stop over a windscreen cut.

Order of completion of procedure of a podnimaniye of folding top

5 — the Handle

Pull a roof for the handle (5) so that there was a zashchelkivaniye at least one of clamps, then return to a starting position the corresponding blocking lever. Then turn up the second lever, - the alarm buzzer should be disconnected, confirming with that the fact of a successful conclusion of process of blocking of a roof.

At failure of the electric drive the podnimaniye of folding top can be made manually (see below).

Emergency closing of folding top

Transfer the AT selector lever to the situation "R".

Cock the parking brake and take a key from the ignition lock.

Make otpuskany blocking of folding top. For an otpuskaniye of blocking of folding top it is necessary to turn down two blocking levers located under sun-protection peaks (1 and 2)

Open the right forward door, liberate a forward part of a sealant of a doorway from a rack "In" and remove the bottom panel of furnish of a rack "In".

Face key turn a head of the emergency valve counter-clockwise.

Wring out in the direction specified by an arrow blocking latches from both parties of the car and at the same time pull up and straighten a folding roof. After the roof edge will tighten to a cut of a windscreen it is necessary to operate as well as at regular installation of a roof.

Buttons of the device of remote control by the electric drive of garage gate

Push-button switches and control light-emitting diode of a control system are built in by functioning of the electric drive in assembly of a salonny rear-view mirror (see an illustration the Scheme of an arrangement of switches on the ceiling console and assembly of a salonny rear-view mirror).

Switches of back individual salonny lamps

Back salonny lamps are equipped with three-position polzunkovy switches

Switches are built in by Polzunkovye in assemblies of the back individual salonny lamps located at the left and on the right over many-placed a back seat of the car and have three regular situation. The principle of functioning of switches is similar to a principle of functioning of the switch of a choice of modes of functioning of the main salonny lighting (see above).

The board computer (at the corresponding complete set)

Detailed information on instructions for use is provided by the board computer in the car maintenance instruction.