Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
9.1. A full drive - the general information
9.2. Transfer case
9.3. Bridges
9.3.1. General information
9.3.2. Check and adjustment oil level / replacement in assemblies of bridges
9.3.3. Check of stuffing by greasing of sharnirny casings of rotary assemblies of the forward bridge
9.3.4. Adjustment of wheel bearings of a forward axis
9.3.5. Check of concentricity of landing of connecting flanges of leading gear wheels of the main transfers
9.3.6. Replacement of epiploons of leading gear wheels of the main transfers
9.3.7. Removal and installation of leading gear wheels of the main transfers
9.3.8. Removal, installation and adjustment of executive cylinders and components of the mechanism of a drive of blocking of interwheel differentials
9.3.9. Dismantling and assembly of the executive cylinder of a drive of blocking of differential
9.3.10. Removal and installation of naves of forward wheels
9.3.11. Dismantling and assembly of naves of forward wheels
9.3.12. Removal and installation of power shafts of the forward bridge
9.3.13. Adjustment of bearings of rotary knots
9.3.14. Dismantling and assembly of a sharnirny casing of the forward bridge
9.3.15. Dismantling and assembly of a power shaft
9.3.16. Removal and installation of semi-axes
9.3.17. Dismantling and semi-axis assembly
9.3.18. Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfers
9.3.19. Dismantling and assembly of interwheel differentials
9.3.20. Check of correctness of gearing of gear wheels of the main transfer
9.3.21. Removal and installation of assemblies of the forward and back bridge
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







9-3-4-regulirovka-kolesnykh-podshipnikov-perednejj-osi.html

9.3.4. Adjustment of wheel bearings of a forward axis

Check and adjustment люфта wheel bearing of a forward axis

1 — Brake shoes

2 — the Protective cover

 PERFORMANCE ORDER

  1. To Poddomkratta a car front also establish it on props. Remove the corresponding forward wheel.
  2. Wring out from a disk brake shoes (1).
  3. By means of a tsiferblatny measuring instrument of plunzherny type measure size люфта the wheel bearing. Compare result of measurement to requirements of Specifications.
  4. Remove a protective cap (2) stupichny assemblies and unblock an external pro-carved nut.
  5. Приболтив to a nave a lock key (717 589 00 31 00), unscrew an external nut.
  6. Remove a lock plate.
  7. Weaken an internal pro-carved nut, then tighten it with initial effort in 200 Nanometers.

In the course of a nut tightening a nave it is necessary to turn a minimum three times, at the same time tapping on it with a hammer with soft brisk (for a usadka of rollers of the bearing).

  1. Once again weaken an internal nut and again tighten it, having completely chosen люфт landings of a clamping plate.
  2. Again weaken a nut approximately on 1/8 turns, having provided люфт with size about 0.1 mm, then plant into place a lock plate.
  3. Previously having greased, tighten an external nut, - the nut should be developed by grooves to a lock plate.
  4. Measure size люфта the wheel bearing, then tighten an external pro-carved nut with demanded effort and, previously having filled greasing, plant into place a protective cap (2).
  5. Several times squeeze out a pedal of a foot brake for the purpose of a usadka of blocks, then establish a wheel.


«previous page
9.3.3. Check of stuffing by greasing of sharnirny casings of rotary assemblies of the forward bridge
following page»
9.3.5. Check of concentricity of landing of connecting flanges of leading gear wheels of the main transfers