|
9-3-18-snyatie-i-ustanovka-sborok-mezhkolesnykh-differencialov-s-vedomymi.html
9.3.18. Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfersPeredny Bridge
Details of installation of assembly of differential of the forward bridge
Check of size of resistance of conic bearings to a provorachivaniye
Check люфта gearings of gear wheels of the main transfer
|
|
- Merge from a bridge case oil (see. The section Check and adjustment oil level/replacement in assemblies of bridges).
- To Otboltita also uncover (1).
- Remove assemblies of both power shafts with sharnirny casings (see. Section Removal and installation of power shafts of the forward bridge).
- Previously having marked (complete with adjusting washers and external holders), remove assembly brackets (2).
- By means of the special adaptation (460 589 05 31 00) unclench a case of a reducer and take from it differential assembled with a conducted gear wheel of the main transfer (3).
- Carefully wipe the removed components, defective
- Installation is made upside-down.
|
|
At installation of a cover (1) do not use any hermetics. Do not forget the conclusion to check size of resistance of bearings a provorachivaniya and люфта gearing of gear wheels of the main transfer (see illustrations above). Also estimate characteristics of spots of contact (see. Section Check of correctness of gearing of gear wheels of the main transfer). Track, that the drain stopper of a case was tightened with demanded effort. |
|
|
Zadny Bridge
Details of installation of assembly of differential of the back bridge
The order of performance of procedure is similar described above for differential of the forward bridge adjusted for a design of the last (an order of extraction of semi-axes).
|