Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
9.1. A full drive - the general information
9.2. Transfer case
9.3. Bridges
9.3.1. General information
9.3.2. Check and adjustment oil level / replacement in assemblies of bridges
9.3.3. Check of stuffing by greasing of sharnirny casings of rotary assemblies of the forward bridge
9.3.4. Adjustment of wheel bearings of a forward axis
9.3.5. Check of concentricity of landing of connecting flanges of leading gear wheels of the main transfers
9.3.6. Replacement of epiploons of leading gear wheels of the main transfers
9.3.7. Removal and installation of leading gear wheels of the main transfers
9.3.8. Removal, installation and adjustment of executive cylinders and components of the mechanism of a drive of blocking of interwheel differentials
9.3.9. Dismantling and assembly of the executive cylinder of a drive of blocking of differential
9.3.10. Removal and installation of naves of forward wheels
9.3.11. Dismantling and assembly of naves of forward wheels
9.3.12. Removal and installation of power shafts of the forward bridge
9.3.13. Adjustment of bearings of rotary knots
9.3.14. Dismantling and assembly of a sharnirny casing of the forward bridge
9.3.15. Dismantling and assembly of a power shaft
9.3.16. Removal and installation of semi-axes
9.3.17. Dismantling and semi-axis assembly
9.3.18. Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfers
9.3.19. Dismantling and assembly of interwheel differentials
9.3.20. Check of correctness of gearing of gear wheels of the main transfer
9.3.21. Removal and installation of assemblies of the forward and back bridge
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 


9-3-20-proverka-pravilnosti-zacepleniya-shesteren-glavnojj-peredachi.html

9.3.20. Check of correctness of gearing of gear wheels of the main transfer

Loading at check of correctness of gearing of gear wheels of the main transfer is provided with a way braked a conducted gear wheel by means of the special adaptation (601 589 01 40 00)


 PERFORMANCE ORDER

  1. Grease pair of teeths of a koronchaty leading gear wheel of the main transfer with ink.
  2. Povrashchayte a leading gear wheel forward-back, at the same time constraining conducted by the special holder (601 589 01 40 00).
  3. Compare received as a result of a spot of contact of teeths with given on illustrations lower the card.

Normal gearing (satisfactory it is possible to consider result when spots of contact do not come for sides of working surfaces of teeths)

Shift of spots of contact to the bases of teeths, - the size of the base landing size of a leading gear wheel is insufficient (make the corresponding adjustment and repeat check, previously having checked люфт gearings - see. The section Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfers)

Shift of spots of contact to tops of teeths, - the size of the base landing size of a leading gear wheel is excessive (make the corresponding adjustment and repeat check, previously having checked люфт gearings - see. The section Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfers)

Shift of spots of contact to heels of teeths, - the size люфта gear wheel gearings (make the corresponding adjustment, - is excessive see. The section Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfers, - also repeat check)

Shift of spots of contact to socks of teeths, - the size люфта gear wheel gearings (make the corresponding adjustment, - is insufficient see. The section Removal and installation of assemblies of interwheel differentials with conducted gear wheels of the main transfers, - also repeat check)


«previous page
9.3.19. Dismantling and assembly of interwheel differentials		 following page»
9.3.21. Removal and installation of assemblies of the forward and back bridge