Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
3.1. Specifications
3.2. Active system of the prevention of term of approach planned THAT (ASSYST)
3.3. Schedule of routine maintenance
3.4. General information on settings
3.5. Check of levels of liquids, control of leaks
3.6. Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels
3.7. Replacement of impellent oil and oil filter
3.8. Check of brake system
3.9. Power supply system check, replacement of the fuel filter
3.10. Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
3.11. Check of a condition of multicostal belts of a drive of auxiliary units
3.12. Check of functioning of system of cooling and frost resistance of cooling liquid, liquid replacement
3.13. Check of a condition of system of production of the fulfilled gases
3.14. ATF and AT filter replacement
3.15. Visual check of tightness of automatic transmission
3.16. Check of a condition of components of a suspension bracket and steering
3.17. Check of a condition of boots of power shafts
3.18. Check of central air of air
3.19. Greasing of limiters of doors and cylinders of locks
3.20. Visual control of seat belts and modules of safety cushions
3.21. Check of operability of headlights and horn
3.22. Check of a condition and replacement of brushes of screen wipers
3.23. Check of a condition of the battery, care of it and charging
3.24. Replacement of the salonny filter
3.25. Replacement of liquid of a drive of blocking of differential
3.26. Replacement of brake liquid
3.27. Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models)
3.28. Replacement of candles of an incandescence (diesel models)
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







3-2-aktivnaya-sistema-preduprezhdeniya-o-sroke-nastupleniya-planovogo-to-assyst.html

3.2. Active system of the prevention of term of approach planned THAT (ASSYST)

The car idle time with the disconnected storage battery ASSYST system at calculation of term of performance next planned THAT ASSYST system is not considered and should be taken into consideration at a conclusion of precautionary messages.

The indicator of term of approach planned THAT informs the owner of a vehicle on OPTIMUM term of carrying out maintenance and its indication are not connected in any way with level of impellent oil.


Example of a conclusion of information on terms of approach planned THAT (according to the list A)

Approximately a month before approach of the next control term at ignition inclusion the ASSYST system provides an automatic conclusion to the screen multipurpose one of the following possible messages:

  • "SERVICE A/IN IN XX DAYS" (THE AMOUNT OF WORKS ON THAT А/В SHOULD BE EXECUTED THROUGH xx OF DAYS);
  • "SERVICE A/in IN xx km" (the AMOUNT OF WORKS ON THAT А/В SHOULD be EXECUTED THROUGH xx of km of RUN);
  • «SERVICE A/IN - DUE NOW!» (EXECUTE AMOUNT OF WORKS ON THAT А/В!);

About 30 seconds later the message should disappear from the screen automatically. In case of need indication can be disconnected compulsorily by a way of pressing the button of dumping of indications at the left on a combination of devices (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column).

In case procedure planned THAT was delayed, on the screen of the display «SERVICE A/B EXCEEDED BY xx DAYS» prevention (PERFORMANCE of AMOUNT OF WORKS ON THAT А/В is DELAYED ON xx DAYS) or «SERVICE A/B EXCEEDED BY xx KM» (the MAXIMUM ADMISSIBLE RUN BEFORE PERFORMANCE of AMOUNT OF WORKS ON THAT А/В is EXCEEDED ON xx KM), in addition being accompanied is deduced by an alarm buzzer.

At performance of planned servicing on firm HUNDRED Mercedes-Benzs dumping of indications of ASSYST system is carried out by specialists of station. In case of need (if service was made on the terms of firm HUNDRED) dumping can be made by the owner of the car independently. Include ignition, - on the screen of the multipurpose display the base page (should be highlighted see. Section Combination of devices, measuring instruments, control lamps and light indicators). Hold the button or the corresponding control panel on a steering wheel until on the screen the symbol or with the indication of term of passing next THAT according to the corresponding list will not be highlighted. Then press the button of dumping of indications at the left on combinations of devices (see an illustration the Scheme of an arrangement of components of management on the dashboard and a steering column) and hold it pressed during about 2 seconds while on the screen the message «will not be highlighted by DO YOU WANT TO RESET SERVICE INTERVAL?» (WISH to MAKE DUMPING of INDICATION of TERM NEXT THAT?) and «CONFIRM BY USING RESET BUTTON» (CONFIRM with PRESSING of the BUTTON of DUMPING of INDICATIONS), - for dumping implementation once again press the button at the left on combinations of devices. Term of performance next THAT should be transferred to the following control mark.

If dumping of indication of ASSYST system was made casually, for restoration of basic data it is necessary to address to experts firm HUNDRED Mercedes-Benzs.

The call of indication of ASSYST in case of need can be made compulsorily through the corresponding function of the board computer (see the operation manual on the car, - ask in shops of automobile literature).

The schedule of routine maintenance (THAT) of the car according to lists A and B is presented in the Section the Schedule of routine maintenance.

The size of the run remaining before performance next THAT, is defined by a manner of driving and lies in limits from 15 000 to 22 500 km (365 ÷ 730 days). An economic manner of driving at average turns of the engine and refusal of trips on short distances promote its increase.


«previous page
3.1. Specifications
following page»
3.3. Schedule of routine maintenance