Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
3.1. Specifications
3.2. Active system of the prevention of term of approach planned THAT (ASSYST)
3.3. Schedule of routine maintenance
3.4. General information on settings
3.5. Check of levels of liquids, control of leaks
3.6. Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels
3.7. Replacement of impellent oil and oil filter
3.8. Check of brake system
3.9. Power supply system check, replacement of the fuel filter
3.10. Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
3.11. Check of a condition of multicostal belts of a drive of auxiliary units
3.12. Check of functioning of system of cooling and frost resistance of cooling liquid, liquid replacement
3.13. Check of a condition of system of production of the fulfilled gases
3.14. ATF and AT filter replacement
3.15. Visual check of tightness of automatic transmission
3.16. Check of a condition of components of a suspension bracket and steering
3.17. Check of a condition of boots of power shafts
3.18. Check of central air of air
3.19. Greasing of limiters of doors and cylinders of locks
3.20. Visual control of seat belts and modules of safety cushions
3.21. Check of operability of headlights and horn
3.22. Check of a condition and replacement of brushes of screen wipers
3.23. Check of a condition of the battery, care of it and charging
3.24. Replacement of the salonny filter
3.25. Replacement of liquid of a drive of blocking of differential
3.26. Replacement of brake liquid
3.27. Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models)
3.28. Replacement of candles of an incandescence (diesel models)
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







3-3-grafik-tekushhego-obsluzhivaniya.html

3.3. Schedule of routine maintenance

Offered recommendations assume independent performance of procedures of service of the car it the owner unlike the works which are carried out at car repair shop of representation office of the Mercedes-Benz company. Though this schedule is made on the basis of manufacturer recommendations, intervals between the majority of procedures at the discretion of the owner of the car can be reduced, for example, check and replacement of greasings and liquids should be made with the intervals providing the maximum service life of the engine or a drive. Besides, if the owner of the car is interested in supporting it in a condition of the maximum readiness for operation on a case of the possible resale, many procedures can be carried out more often. Present originators Rukoodstva can greet a similar initiative only.

Initial service and check of the new car should be made at car repair shop of representation office of the Mercedes-Benz company for the purpose of performance of conditions of guarantee certificates. This service is provided free of charge.

The checks made on a regular basis

Annually

Each 2 years

  • Make replacement of brake liquid (see. Section Replacement of brake liquid).
  • Check a condition of a paint and varnish covering.
  • Check a condition of components of the chassis bearing and basic body elements.

Each 3 years

Through the first 48 000 km, or in 4 years of operation (once), - only diesel models

Each 96 000 km, or time in 4 years

Each 160 000 km, or time in 4 years

  • Make replacement of spark plugs on petrol models.

The procedures which are carried out according to standard Lists of works on THOSE (according to ASSYST system indication)

List A: Procedure is carried out in case run from the moment of performance of the last service according to the list B makes less than 22 000 km.

List B: Procedure is carried out in case run from the moment of performance of the last service according to the list B makes more than 22 000 km.

Primary service is made according to the list B (full amount of works)!

List A

Car salon, screen wipers

  • Check serviceability of functioning of the following devices:
    • Devices of the sound and light alarm system, indexes of turns / alarm system;
    • Control/display lamps, elements of illumination and devices of internal lighting;
    • External lighting devices;
    • Screen wipers;
    • Stekloomyvateli (including washers of headlights).
  • Check a condition and serviceability of functioning of seat belts.
  • Null the counter of intervals planned THAT on an instrument guard (see. Section Active system of the prevention of term of approach planned THAT (ASSYST)).

Wheel assemblies and brake mechanisms

Impellent compartment

Impellent compartment of petrol models (on G55 AMG example)

1 — Shchup of measurement of level of impellent oil
2 — the Jellied mouth of impellent oil
3 — the Oil filter
4 — the Broad tank of system of cooling

5 — the Tank of liquid of washing of glasses (in a shot it is not visible)
6 — the GTTs Tank
7 — the Tank of a hydraulic actuator of blocking of differentials
8 — the Tank of the steering pump (GUR)

Impellent compartment of the diesel G270 CDI models

1 — Shchup of measurement of impellent oil

2 — the Jellied mouth of impellent oil

Impellent compartment of the diesel G400 CDI models

1 — Shchup of measurement of impellent oil
2 — the Jellied mouth of impellent oil

3 — the Oil filter

Be careful at works in an impellent compartment, - operation of the fan of system of cooling can occur within about 30 more seconds after engine switching off!

In electronic systems of ignition, very high voltage is generated! Be attentive, observe all necessary precautionary measures at service of any components of system, turning on not only the main (the ignition module, the coil and VV electroconducting), but also and accompanying, such as candle sockets, a tachometer and the other connected diagnostic equipment. Special attentiveness should be observed at the working engine, during its start, at the included ignition (a key in situation 2) and at a provorachivaniye of a cranked shaft manually. Persons with the implanted pacemaker to be allowed to service of components of system of ignition should not!

List B

Salon, headlights and screen wipers

463 releases with 12.2000 storage battery (G1) are located on models in a back foot well in car salon

In addition to the procedures listed in the List A:

Wheel assemblies and brake mechanisms

Car bottom

  • Check the components located under the bottom and lines of connecting paths on existence of signs of development of leaks.
  • Check a condition and correctness of laying of hydraulic and fuel lines.
  • Check a condition of spherical support and rubber boots of sharnirny assemblies of power shafts, suspension bracket and steering components.
  • Estimate degree of wear of components of a steering drive (on size люфтов).

Impellent compartment

Options of installation of the storage battery (G1) on models 463 releases to 12.2000

And — In an impellent compartment

In — At the left in a luggage compartment

In addition to the procedures listed in the List A:

Body

  • Check lamps of headlights (except xenon) on compliance of requirements of Specifications to consumption capacity.
  • Check correctness of adjustment of optical axes of headlights, in case of need make the corresponding adjustment (see. Head Onboard electric equipment).
  • Replace working elements of brushes of screen wipers (including cleaners of headlights).

Luggage compartment

  • Check electrolit level in the battery, - release models to 12.2000 (the option of installation of the battery in a luggage compartment is shown on an illustration above).

«previous page
3.2. Active system of the prevention of term of approach planned THAT (ASSYST)
following page»
3.4. General information on settings