Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.3. Back suspension bracket
11.4. Steering
11.4.1. General information
11.4.2. Check of a pressure of the steering pump
11.4.3. Check and adjustment of the hydraulic limiter
11.4.4. Adjustment of a steering shaft
11.4.5. Assessment of a condition of components of a steering drive
11.4.6. Removal and installation of a steering wheel
11.4.7. Removal and installation of a contact cable drum of a steering wheel
11.4.8. Removal and installation of the sensor of an angle of rotation of a steering wheel
11.4.9. Removal and installation of the mechanism of an electronic blokirator of a steering column
11.4.10. Removal and installation of a steering column with the adjustment electric drive
11.4.11. Removal and installation of the steering pump
11.4.12. Removal and installation of the line of cooling of GUR liquid
11.4.13. Removal and installation of the steering mechanism
11.4.14. Design of the steering mechanism
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







11-4-rulevoe-upravlenie.html

11.4. Steering

General information

The steering drive is organized according to the scheme "trapeze" by means of the hydrostrengthened worm gear with circulating balls and a safety adjustable steering column.

Scheme of the organization of a steering drive

1 — the Steering shaft with a column shirt
2 — Kardanny the hinge
3 — Developing section of a steering shaft
4 — Connecting draft
5 — the Steering damper
6 — the Rotary lever
7 — the Steering soshka

8 — the Steering mechanism
9 — Cross-section draft
10 — the Rotary lever
11 — the Steering pump
12 — the Returnable tube
13 — the Pressure head line
14 — the Contour of cooling of GUR liquid


«previous page
11.3.6. Removal and installation of longitudinal levers of a suspension bracket
following page»
11.4.1. General information