
Mercedes-Benz G-class (W463) since 1999 of release
	1. Introduction
	2. Governing bodies and operation receptions
	3. Current leaving and service
	4. Engine
	5. Systems of cooling, heating, ventilation and air conditioning
	6. A power supply system and production of the fulfilled gases
	7. Systems of electric equipment of the engine
	8. Automatic transmission
	9. Transmission line
	10. Brake and auxiliary systems
	11. Suspension bracket and steering
		11.1. Specifications
		11.2. Forward suspension bracket
		11.3. Back suspension bracket
			11.3.1. General information
			11.3.2. Removal and installation of assembly of the back bridge
			11.3.3. Removal, check and installation of back shock-absorbers
			11.3.4. Removal and installation of springs of a forward suspension bracket
			11.3.5. Removal and installation of the back stabilizer of cross-section stability
			11.3.6. Removal and installation of longitudinal levers of a suspension bracket
		11.4. Steering
		11.5. Suspension bracket geometry
	12. Body
	13. Onboard electric equipment
	14. Schemes of electric connections

11-3-6-snyatie-i-ustanovka-prodolnykh-rychagov-podveski.html

11.3.6. Removal and installation of longitudinal levers of a suspension bracket

Details of installation of the longitudinal lever of a back suspension bracket


1 — the Longitudinal lever 2 — the Nut	3 — the Bolt

PERFORMANCE ORDER

Fix the car motionlessly.
Liberate a cable of a drive of the parking brake from intermediate clamps on the longitudinal lever (1).
Release a nut (2) fastenings of the lever (1) to a frame.
Release a nut and take a bolt (3) fastenings of the lever (1) to assembly of the back bridge.
Remove the lever.
Installation is made upside-down. Track correctness of landing of rubber plugs.

following page»
11.4. Steering