Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.3. Back suspension bracket
11.3.1. General information
11.3.2. Removal and installation of assembly of the back bridge
11.3.3. Removal, check and installation of back shock-absorbers
11.3.4. Removal and installation of springs of a forward suspension bracket
11.3.5. Removal and installation of the back stabilizer of cross-section stability
11.3.6. Removal and installation of longitudinal levers of a suspension bracket
11.4. Steering
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







11-3-5-snyatie-i-ustanovka-zadnego-stabilizatora-poperechnojj-ustojjchivosti.html

11.3.5. Removal and installation of the back stabilizer of cross-section stability

Самоконтрящийся the fixture is subject to replacement without fail!


 PERFORMANCE ORDER

  1. Release fixing nuts (1) and disconnect collars of fastening of a bar of the stabilizer of cross-section stability to longitudinal levers of a suspension bracket. Estimate a condition of rubber plugs, in case of need prepare replaceable elements.
  1. Give nuts of bolts of fastening of a bar of the stabilizer to racks. Take bolts and remove a bar.
  1. Installation is made upside-down.


«previous page
11.3.4. Removal and installation of springs of a forward suspension bracket
following page»
11.3.6. Removal and installation of longitudinal levers of a suspension bracket