Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.3. Back suspension bracket
11.4. Steering
11.4.1. General information
11.4.2. Check of a pressure of the steering pump
11.4.3. Check and adjustment of the hydraulic limiter
11.4.4. Adjustment of a steering shaft
11.4.5. Assessment of a condition of components of a steering drive
11.4.6. Removal and installation of a steering wheel
11.4.7. Removal and installation of a contact cable drum of a steering wheel
11.4.8. Removal and installation of the sensor of an angle of rotation of a steering wheel
11.4.9. Removal and installation of the mechanism of an electronic blokirator of a steering column
11.4.10. Removal and installation of a steering column with the adjustment electric drive
11.4.11. Removal and installation of the steering pump
11.4.12. Removal and installation of the line of cooling of GUR liquid
11.4.13. Removal and installation of the steering mechanism
11.4.14. Design of the steering mechanism
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 


11-4-12-snyatie-i-ustanovka-linii-okhlazhdeniya-zhidkosti-gur.html

11.4.12. Removal and installation of the line of cooling of GUR liquid

Models 463.246/249/250/333

Details of installation of the line of cooling of GUR liquid on models 463.246/249/250/333 (1 of 2)

1 — the Returnable hose

3 — the Returnable hose of the steering mechanism

Details of installation of the line of cooling of GUR liquid on models 463.246/249/250/333 (2 of 2)

2 — the Line of an okhladitelny path

4 — the Nut

 PERFORMANCE ORDER

  1. Lower forward a forward lattice (see. Head Body).
  2. Remove the left block headlight (see. Head Onboard electric equipment).
  3. Remove a loker of protection of the left wheel arch.
  4. Pump out liquid from the GUR tank.
  5. Disconnect a returnable hose (1) from the line (2) of an okhladitelny path, - prepare for collecting spilled liquid.
  6. Disconnect from the line (2) a returnable hose (3) helmsmen of the mechanism, - prepare for collecting spilled liquid.
  7. Several times turn a steering wheel from an emphasis against the stop, - ask the assistant to collect (3) liquid forced out from a hose.

In order to avoid an exit of the steering pump out of operation at all do not leave the engine working!

  1. Release nuts (4), remove the line of an okhladitelny path (2) and merge from it liquid in the prepared capacity.
  2. Installation is made upside-down, do not forget to fill in fresh liquid in the GUR tank.

Models 463.323

Details of installation of the line of cooling of GUR on models 463.323 (1 of 2)

1 — the Left horn of a horn
2 — the Returnable tube
3 — the Line of an okhladitelny path

4 — the Bolt

Details of installation of the line of cooling of GUR on models 463.323 (2 of 2)

3 — the Line of an okhladitelny path

4 — the Bolt

 PERFORMANCE ORDER

  1. Remove a forward lattice (see. Head Body).
  2. Remove the left block headlight (see. Head Onboard electric equipment).
  3. Pump out liquid from the GUR tank.
  4. Disconnect the left horn of a horn (1).
  5. Disconnect returnable lines (2) from the line of cooling of GUR (3).
  6. Having asked the assistant to collect liquid forced out from a hose, several times turn a steering wheel from an emphasis against the stop.
  7. Release bolts (4), remove the line of an okhladitelny path (3) and merge from it liquid in the prepared capacity.
  8. Installation is made upside-down, do not forget to fill in fresh liquid in the GUR tank.

«previous page
11.4.11. Removal and installation of the steering pump		 following page»
11.4.13. Removal and installation of the steering mechanism