|
12-3-15-snyatie-i-ustanovka-panelejj-otdelki-salona.html
12.3.15. Removal and installation of panels of furnish of salonCabriolet models
Panels of furnish of lateral windows
Details of installation of the panel of furnish of lateral glass on the Cabriolet models
|
|
- Open folding top.
- Remove lateral glass (see. Section Removal and installation of elements of a glazing of a body).
- Turn out screws (2) and remove a fixing loop (1).
- Turn out screws (4) and remove a support of a vetrootboynik (3).
- Remove a protector (5).
- Release two clamps (7) and remove the finishing panel (6).
- Installation is made upside-down.
|
|
Lateral panels
Details of installation of lateral panels of furnish of salon on the Cabriolet models (1 of 3)
Details of installation of lateral panels of furnish of salon on the Cabriolet models (2 of 3)
Details of installation of lateral panels of furnish of salon on the Cabriolet models (3 of 3)
|
|
- Remove panels of furnish of a lateral window (see above).
- Remove a protector (1) around a rack of Century.
- Release three clamps (4) and separate the bottom lateral finishing panel (2) from top (3).
- Remove a facing slip and turn out a bolt (And) the bottom anchor (In) a seat belt.
- Release a clamp (4) and, having submitted up, remove the bottom lateral finishing panel (2).
- Remove a rivet (5).
- Uncover a luggage compartment with a vetrootboynik.
- Give a nut (6) folding tops.
- Remove decorative slips and turn out screws (8) for the purpose of weakening of a frame (7) on the window shelf.
- Remove support (9) vetrootboynik (on three from each party).
- Disconnect electroconducting from a lamp of illumination of a luggage compartment (E18/2 or E18/3).
- Release clamps (shooters) and liberate the top finishing panel (3).
- On models of the corresponding complete set (E08 code) disconnect electroconducting from a loudspeaker.
- On models of the corresponding complete set (H11 code) disconnect electroconducting of heating of a back seat.
- Having submitted up, remove the panel (3).
- Installation is made upside-down.
|
|
Versatile person models
Lateral panels
Details of installation of lateral panels of furnish of salon on the Versatile person models
|
|
- Separate from the finishing panel (2) a protector (1).
- Remove the finishing panel (2) (see. The section Removal and installation of panels of furnish of body racks), - do not forget to disunite the socket of electroconducting of a loudspeaker.
- Liberate a rubber sealant (3) around installation of the lateral finishing panel (4).
- Turn out bolts of anchor knots (7 and 8) a seat belt.
- Remove the lateral finishing panel (4).
- Installation is made upside-down, - track correctness of landing of bottom edge of the panel (arrow).
|
|
Top back panel
Details of installation of the top back panel of furnish on the Versatile person models
|
|
- Remove panels of furnish of back racks (3) (see. Section Removal and installation of panels of furnish of body racks).
- Remove back salonny lamps (see. Head Onboard electric equipment).
- On models of the corresponding complete set (SD0 code) turn out (6) screw located under a decorative cover and remove the top eye of fixing of a children's seat of ISOFIX.
- Turn out screws (5) and dismantle the back top finishing panel (4), having accurately removed it from directing support of a ceiling upholstery.
- Installation is made upside-down.
- In summary make sure of serviceability of functioning of salonny lamps and (at the corresponding complete set) the BA signaling device.
|
|
|