Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
12.1. Specifications
12.2. External equipment and body elements
12.3. Salon equipment
12.3.1. Removal and installation of the bottom covers of the dashboard
12.3.2. Removal and installation of deflectors of air lines of the dashboard
12.3.3. Removal and installation of a ware box
12.3.4. Removal and installation of the handle of the dashboard
12.3.5. Removal and installation of a forward ashtray
12.3.6. Removal and installation of the left bottom section of furnish of the dashboard
12.3.7. Removal and installation of a knee emphasis
12.3.8. Removal and installation of a face cover of a steering column
12.3.9. Removal and installation of the facing panel of console section of the dashboard
12.3.10. Removal and installation of the central console
12.3.11. Removal and installation of a combination of devices
12.3.12. Removal and dashboard installation
12.3.13. Removal and installation of a salonny rear-view mirror
12.3.14. Removal and installation of panels of furnish of body racks
12.3.15. Removal and installation of panels of furnish of salon
12.3.16. Removal and installation of a ceiling upholstery (Versatile person model)
12.3.17. Removal and installation of panels of a carpet of a floor
12.3.18. Removal and installation of assemblies of forward seats
12.3.19. Removal and installation of assemblies of back seats
12.3.20. Removal and installation of backs of seats
12.3.21. Removal and installation of pillows of seats
13. Onboard electric equipment
14. Schemes of electric connections


 







12-3-20-snyatie-i-ustanovka-spinok-sidenijj.html

12.3.20. Removal and installation of backs of seats

Forward seats

Cabriolet models / short base

Details of installation of a back of a forward seat (Cabriolet model / short base)

1 — the Cap
2 — the Screw
3 — the Finishing panel
4 — Screws of the connecting block
5 — Elektroprovodka
6 — the Binding
7 — Bolts of fastening of a back
8 — the Back
9 — the Pneumatic line
10 — the Operating valve

a, b, c — Sockets of electroconducting of the module of management
N32/1 — the Module of management of adjustment driver's the seat/helmsman of a column with memory of installations
N32/2 — the Module of management of adjustment of a passenger seat with memory of installations
X55/3 — I Will corrode electroconductings of heating of a driver's seat
X55/4 — I Will corrode electroconductings of heating of a passenger seat
Arrow — the Sealing cap

 PERFORMANCE ORDER

  1. Remove assembly of a forward seat (see. Section Removal and installation of assemblies of forward seats).
  2. Remove a cap (1) and turn out from the finishing panel (3) the screw (2).
  3. Take a sealing cap (shooter) and turn out the fixing screw located under it.
  4. Having wrung out back, liberate from clamps and remove the lateral finishing panel (3).
  5. Disunite the socket (and) electroconductings of the module of management (N32/1 or N 32/2).
  6. Having marked adjusting provisions, disunite sockets (b and c) on a block (X55/3 or X55/4).
  7. Turn out screws (4) of the connecting block.
  8. On models of the corresponding complete set (the SM7 code and SM/8) remove the control valve (10) and disconnect the pneumatic line (9) of multicircuit adjustment.
  9. Take aside electroconducting (5) and (at the corresponding complete set) the pneumatic line, - obvyazochny bandages (6) are subject to replacement without fail.
  10. Turn out fixing bolts with left and on the right side and remove a back (8) seats.
  11. Installation is made upside-down, - track correctness of connection of electroconducting.

Versatile person models

Details of installation of a back of a forward seat (Versatile person model)

1 — the Right finishing panel
2 — the Fixing bolt
3 — the Left finishing panel
4 — Screws of the connecting block
5 — Elektroprovodka
6 — the Binding
7 — Bolts of fastening of a back
8 — the Back
9 — the Pneumatic line
10 — the Operating valve

a, b, c — Sockets of electroconducting of the module of management
N32/1 — the Module of management of adjustment driver's the seat/helmsman of a column with memory of installations
N32/2 — the Module of management of adjustment of a passenger seat with memory of installations
X55/3 — I Will corrode electroconductings of heating of a driver's seat
X55/4 — I Will corrode electroconductings of heating of a passenger seat
The shooter — I Will corrode electroconductings

 PERFORMANCE ORDER

  1. Remove assembly of a forward seat (see. Section Removal and installation of assemblies of forward seats).
  2. Remove a sealing cap, turn out the fixing screw (2) and remove the right finishing panel (1).
  3. The left finishing panel (3) acts in film also as well as on the Cabriolet models (see paragraphs with 2 on 4).
  4. Disunite the socket (5) of electroconducting of the module of management (N32/1 or N 32/2).
  5. On models with heating of seats (H10 code) disunite sockets (X55/3 or X55/4) the corresponding electroconducting. Also release the socket specified by an arrow and liberate from its casing both wires of heating of a back (8), previously them having marked.
  6. On models of the corresponding complete set (the SM7 code and SM/8) remove the control valve (10) and disconnect the pneumatic line (9) of multicircuit adjustment.
  7. Further act in the manner similar described above for Cabriolet models (see above paragraphs with 9 on 11).

Back seats

Details of installation of a back of a back seat (1 of 2)

1 — the Finishing panel

2 — the Lever of an otpuskaniye of a clamp of a back

Details of installation of a back of a back seat (2 of 2)

3 — Sockets of electroconducting of heating (R13/6x1, - at the left, or R13/8x1, - on the right)
4 — the Mechanism of blocking of a back
5 — the Lock washer of bolts of a blokirator

6 — Bolts of a blokirator of a back
7 — Screws of fastening of a back

 PERFORMANCE ORDER

  1. Remove back head restraints and combine a seat back forward.
  2. Having hooked, remove the lever (2) otpuskaniye of a clamp of a back.
  3. Turn out fixing screws and remove the finishing panel (1).
  4. On models of the corresponding complete set (H11 code) disunite sockets (3) electroconductings of heating of a back (R13/6x1 or R13/8x1), cut obvyazny bandages and liberate from a wire back.
  5. Remove a lock washer (5), turn out bolts (6) and disconnect the mechanism of blocking of a back.
  6. Turn out fixing bolts (7) and remove a back.
  7. Installation is made upside-down.


«previous page
12.3.19. Removal and installation of assemblies of back seats
following page»
12.3.21. Removal and installation of pillows of seats