|
12-3-18-snyatie-i-ustanovka-sborok-perednikh-sidenijj.html
12.3.18. Removal and installation of assemblies of forward seatsCabriolet models / short base
Details of installation of a forward seat on the Cabriolet models (1 of 2)
Details of installation of a forward seat on the Cabriolet models (2 of 2)
|
|
- Remove an emphasis (6) regulators of a seat.
- Shift assembly of a seat (1) forward and turn out back bolts (5) fastenings of a frame.
- Shift assembly of a seat (1) back.
- Release clamps (shooters) and uncover (And) domkratny office (only passenger seat).
- Take a jack, then turn out bolts (C) and remove an assembly bracket (In) jack fastenings (only passenger seat).
- Turn out forward bolts (2) fastenings of a frame of a seat.
- On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
- Disconnect a negative wire from the battery.
- Remove the fire extinguisher (only driver's seat).
- Turn out screws (3) fastenings of an assembly bracket of the fire extinguisher (only driver's seat).
- Incline a seat forward and disunite the socket (X55/15 or X55/16) electroconductings.
- On models of the corresponding complete set (the SM7 code and SM/8) disconnect the pneumatic line (4) of multicircuit adjustment.
- Remove assembly of a forward seat (1).
- Installation is made upside-down, - at installation of an emphasis (6) leave free not less than two teeths of an adjusting lath.
- On models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
- In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine), and also make sure of serviceability of functioning of the electric drive of a seat.
|
|
Versatile person models
Details of installation of a forward seat on the Versatile person models
|
|
- Shift assembly of a seat (1) in extreme back situation and remove an emphasis (7) regulators.
- Shift seat assembly forward.
- Dismantle a decorative cap (2) and turn out an anchor bolt (3) seat belts.
- Turn out back bolts (4) fastenings of a frame, then shift a seat (1) back and turn out forward bolts (5).
- On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
- Disconnect a negative wire from the battery.
- Disunite sockets of electroconducting of a drive (N32/1 or N32/2) and (on models of the corresponding complete set, - the H10 code) heating (X55/3 or X55/4) seats.
- On models of the corresponding complete set (the SM7 code and SM/8) disunite the pneumatic socket (6) of multicircuit adjustment.
- Remove assembly of a forward seat (1).
- Installation is made upside-down, - at installation of an emphasis (6) leave free not less than two teeths of an adjusting lath.
- On models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
- In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine), and also make sure of serviceability of functioning of the electric drive of a seat.
|
|
|
|