|
12-3-14-snyatie-i-ustanovka-panelejj-otdelki-kuzovnykh-stoek.html
12.3.14. Removal and installation of panels of furnish of body racksRacks And
Details of installation of panels of furnish of racks And
|
|
- Liberate from a first line of a doorway a rubber sealant (1).
- Having pulled, liberate the finishing panel (2) on a sealant of a window frame.
- Installation is made upside-down.
|
|
Racks In
Cabriolet models
Details of installation of panels of furnish of racks In on the Cabriolet models
|
|
- Remove lateral panels of furnish of salon (see. Section Removal and installation of panels of furnish of salon).
- Release a zaklepochny clamp of fastening of the finishing panel (1) in the basis of a rack of Century.
- Having turned out the fixing bolts located under a facing framework, remove the top handle.
- Having liberated the respective edge of a door sealant, remove the top lateral finishing panel (2).
- Having released the nut located under a facing cover, remove directing bracket (3) seat belts.
- Remove a protector (4) from both parties of the ceiling finishing panel (5).
- Remove the panel (5).
- On models of the corresponding complete set (J44 code) liberate a porous and rubber covering (6) and disunite the socket (7) of electroconducting of the ultrasonic sensor of the BA signaling device (only on the right rack).
- Liberate from a body aperture around a rack In a door sealant.
- Remove a protector (4) from the back party of a rack of Century.
- Having accurately released clamps, remove a cutting cover (shooter) and liberate from it a seat belt.
- Remove the panel (1) furnish of a rack.
- Installation is made upside-down.
|
|
Versatile person models
Details of installation of panels of furnish of racks In on the Versatile person models (1 of 4)
Details of installation of panels of furnish of racks In on the Versatile person models (2 of 4)
Details of installation of panels of furnish of racks In on the Versatile person models (3 of 4)
Details of installation of panels of furnish of racks In on the Versatile person models (4 of 4)
|
|
- Remove door (arrow) sealant from both parties of a rack of Century.
- Remove a cap (2) and turn out a bolt (3) bottom anchor knots of a seat belt.
- Remove a facing cover (4) and give a nut (5) fastenings of a directing bracket of the top anchor knot of a seat belt.
- Liberate a seat belt from the panel (1) furnish of a rack of Century.
- On models of the corresponding complete set (H11 code) disconnect electroconducting from the switch of heating of a back seat.
- Remove the panel (1) furnish of a rack of Century.
- Installation is made upside-down.
|
|
Back racks (Versatile person models)
The corresponding illustrative material is presented on an illustration
of the Detail of installation of a door of a back on the Versatile person models
and сопр. illustrations which all references meeting in the text concern.
Details of installation of the panel of furnish of the left back rack
|
|
- On models of the corresponding complete set (V53 and V57 codes) uncover a luggage compartment (And).
- On models of the corresponding complete set (V53 code) uncover (In) a lateral ware compartment, then turn out the fixing screw (D) and separate a ware compartment (C) from a back rack.
- Remove from a back rack a protector (1) edge of a doorway.
- Having submitted aside, remove the finishing panel (2) racks, - do not forget disunite the socket of electroconducting of a loudspeaker (H4/7h2 or H4/8h2).
- On models of the corresponding complete set (J44 code) disunite the socket of electroconducting of the BA signaling device (only on the right rack).
- Remove the panel (2).
- Installation is made upside-down.
|
|
|