Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
12.1. Specifications
12.2. External equipment and body elements
12.3. Salon equipment
12.3.1. Removal and installation of the bottom covers of the dashboard
12.3.2. Removal and installation of deflectors of air lines of the dashboard
12.3.3. Removal and installation of a ware box
12.3.4. Removal and installation of the handle of the dashboard
12.3.5. Removal and installation of a forward ashtray
12.3.6. Removal and installation of the left bottom section of furnish of the dashboard
12.3.7. Removal and installation of a knee emphasis
12.3.8. Removal and installation of a face cover of a steering column
12.3.9. Removal and installation of the facing panel of console section of the dashboard
12.3.10. Removal and installation of the central console
12.3.11. Removal and installation of a combination of devices
12.3.12. Removal and dashboard installation
12.3.13. Removal and installation of a salonny rear-view mirror
12.3.14. Removal and installation of panels of furnish of body racks
12.3.15. Removal and installation of panels of furnish of salon
12.3.16. Removal and installation of a ceiling upholstery (Versatile person model)
12.3.17. Removal and installation of panels of a carpet of a floor
12.3.18. Removal and installation of assemblies of forward seats
12.3.19. Removal and installation of assemblies of back seats
12.3.20. Removal and installation of backs of seats
12.3.21. Removal and installation of pillows of seats
13. Onboard electric equipment
14. Schemes of electric connections


 







12-3-16-snyatie-i-ustanovka-potolochnojj-obivki-modeli-universal.html

12.3.16. Removal and installation of a ceiling upholstery (Versatile person model)

Details of installation of a ceiling upholstery on the Versatile person models (1 of 5)

1, 2 — Sun-protection peaks
3 — the Bolt
4 — Support
5 — the Holder
6 — the Cover
7 — Salonnoye a rear-view mirror

8, 9 — Panels of furnish of racks And
В25 — the Microphone of system of the Hands-free device
N70 — the Panel of switches of the ceiling console

Details of installation of a ceiling upholstery on the Versatile person models (2 of 5)

10 — the Handle
11 — Covers

22 — Points of fastening of a luggage grid
23 — the Bolt

Details of installation of a ceiling upholstery on the Versatile person models (3 of 5)

12 — the Support of a salonny rear-view mirror
13, 16 — Screws
14 — I Will corrode electroconductings

15 — the Chromeplated slip
19 — the Metal clamp
В38 — the rain Sensor

Details of installation of a ceiling upholstery on the Versatile person models (4 of 5)

17 — Screws
18 — Directing

20 — Fixing screws

Details of installation of a ceiling upholstery on the Versatile person models (5 of 5)

19 — the Metal clamp

21 — the Ceiling upholstery

 PERFORMANCE ORDER

  1. Completely open the top hatch.
  2. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  3. Remove the left forward seat assembled with a frame (see. Section Removal and installation of assemblies of forward seats).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. Develop in the parties, turn out from basic arms (4) screws (3), at the corresponding complete set disunite the socket of electroconducting and remove sun-protection peaks (1 and 2).
  2. Turn out (6) fixing screws located under decorative covers and remove holders (5) sun-protection peaks (1 and 2).
  3. Remove the panel of switches (N70) of the ceiling console (see. Head Onboard electric equipment).
  4. Remove a salonny rear-view mirror (7) (see. Section Removal and installation of a salonny rear-view mirror).
  5. On models of the corresponding complete set accurately hook and liberate from a ceiling upholstery (21) microphones (В25) of the Hands-free/Linguatronic device, disconnect microphone t electroconducting.
  6. Remove assembly of the left back seat with a back (see. Section Removal and installation of assemblies of forward seats).
  7. Remove panels (8 and 9) furnish of racks And (see. Section Removal and installation of panels of furnish of body racks).
  8. Remove panels of furnish of racks In (see. Section Removal and installation of panels of furnish of body racks).
  9. Remove lateral panels of furnish of salon (see. Section Removal and installation of panels of furnish of salon).
  10. Remove back salonny lamps (see. Head Onboard electric equipment).
  11. Remove the back top panel of furnish (see. Section Removal and installation of panels of furnish of salon).
  12. Turn out (11) fixing bolts located under covers and remove the top handles (10).
  13. At the corresponding complete set turn out fixing screws (23) and remove knots of fastening of a luggage grid (22).
  14. Remove the directed back lamps (see. Head Onboard electric equipment).
  15. Turn out bolts (13), disunite the socket (14) of the sensor of a rain (В38) and remove a basic arm (12) salonny rear-view mirrors.
  16. Remove an upholstery of a cover of the top hatch (see. Section Removal and installation of the panel of an upholstery of a cover of the top hatch).
  17. Turn out six screws (16) and remove the chromeplated overlay (15) frames of the top hatch.
  18. Turn out bolts (17) both of directing (18) top hatches.
  19. Accurately separate an upholstery (21) from the ceiling panel in gluing points around an aperture of the top hatch.
  20. Release metal clamps (19) and liberate an upholstery (21) of a hatch aperture.
  21. Turn out bolts (20) fastenings of a ceiling upholstery (21).
  22. Separate an upholstery (21) from Velkro's (shooters) clamps and, having shifted on a diagonal back, take from the car.
  23. Installation is made upside-down, - track correctness of hit of electroconducting (3) sensors in sample (4).
  24. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. Head of System of electric equipment of the engine).


«previous page
12.3.15. Removal and installation of panels of furnish of salon
following page»
12.3.17. Removal and installation of panels of a carpet of a floor