|
10-16-snyatie-i-ustanovka-supportov-tormoznykh-mekhanizmov.html
10.16. Removal and installation of supports of brake mechanisms
Brake mechanisms of forward wheels
Details of installation of a support of the fixed type of the brake mechanism of a forward wheel
|
|
- Disconnect from a support (31) brake lines (5), - at once закупорьте the open end of a tube.
- Liberate from a contact block (S10/1x1 or S10/2x1) the sensor of wear of blocks (S10/1 or S10/2).
- Turn out a contact block (S10/1 or S10/2) from a support (31).
- To Otboltita a support (31) from assembly of a rotary fist.
- Installation is made upside-down, - do not forget to replace mikroinkapsulirovanny bolts (35).
- In summary pump over a hydraulic path (see. The section Pumping of brake system) also check serviceability of functioning of brakes.
|
|
Brake mechanisms of back wheels
Details of installation of a support of floating type of the brake mechanism of a back wheel (1 of 2)
Details of installation of a support of floating type of the brake mechanism of a back wheel (2 of 2)
|
|
- Press and disconnect from a support (2) brake hose (1).
- Separate a support (2) from an anchor bracket (6), - prepare the replaceable hidden directing mikroinkapsulirovanny bolts (3).
- Disconnect the sensor of wear of brake shoes (it is established only in the mechanism of the right back wheel).
- By means of the suitable adaptation wring out in the cylinder the piston (4), - prepare for collecting liquid forced out from the GTTs tank.
- Smooth out a support a special brush.
- Check a support (2) on existence of signs of development of leaks, check a condition of a boot of the piston (4). Defective components (support/boot) replace.
- Installation is made upside-down, - do not forget to replace mikroinkapsulirovanny bolts (3).
- In summary pump over a hydraulic path (see. The section Pumping of brake system) also check serviceability of functioning of brakes.
|
|
|