Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.3. Power supply system of diesel engines
6.3.1. General information
6.3.2. Checks of system of injection of fuel
6.3.3. Service of components of an inlet air path
6.3.4. Service of components of a drive of a butterfly valve
6.3.5. Oporozhneniye of a fuel tank
6.3.6. Removal and installation of the sensor of a stock of fuel
6.3.7. Air removal from a contour of low pressure of a fuel path
6.3.8. Removal and installation of the preliminary fuel pump
6.3.9. Removal and installation of the fuel pump of a high pressure (TNVD)
6.3.10. Removal and installation of the fuel distributive highway and nozzles
6.3.11. Removal and installation of the sensor of pressure in the fuel highway
6.3.12. Removal and installation of the valve regulator of pressure of fuel
6.3.13. Removal and installation of klapanny assembly
6.3.14. Removal and installation of a cooler of fuel
6.3.15. Removal and installation of a low-temperature cooler
6.3.16. Removal and installation of the module of management by fuel injection
6.3.17. Removal and installation of a fuel tank
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







6-3-11-snyatie-i-ustanovka-datchika-davleniya-v-toplivnojj-magistrali.html

6.3.11. Removal and installation of the sensor of pressure in the fuel highway

Models 463.323 (М612)

Details of installation of the sensor of pressure in the fuel distributive highway (М612)

21 — the Highway

B4/6 — the Sensor of pressure of fuel

 PERFORMANCE ORDER

  1. Remove panels of furnish of a cover of a head of cylinders.
  2. Disconnect electroconducting and remove the sensor of the pressure (B4/6), the second key hold the union on highways (21).
  3. Installation is made upside-down. In summary clear memory of the module of onboard self-diagnostics (see. Head of System of electric equipment of the engine).

Models 463.333 (М628)

Details of installation of the sensor of pressure in the fuel distributive highway (М628)

1 — the Vacuum line
2 — the Basic arm

21/7 — Klapanny the block
B4/6 — the Sensor of pressure of fuel

 PERFORMANCE ORDER

  1. Remove an air purifier (see. Section Service of components of an inlet air path).
  2. Liberate from a basic arm (2) and take aside the vacuum line (1).
  3. Disconnect electroconducting and remove the sensor of pressure (B4/6).
  4. Installation is made upside-down. In summary clear memory of the module of onboard self-diagnostics (see. Head of System of electric equipment of the engine).


«previous page
6.3.10. Removal and installation of the fuel distributive highway and nozzles
following page»
6.3.12. Removal and installation of the valve regulator of pressure of fuel