Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.3.1. Removal and installation of switches of a steering column
13.3.2. Group of switches at the left on the dashboard
13.3.3. Removal and installation of the handle of the switch and actuation mechanisms of a drive of correction of provision of block headlights
13.3.4. Removal and installation of assembly of the top groups of switches of a console part of the dashboard
13.3.5. Removal and installation of the panel of switches of blocking of differentials
13.3.6. Removal and installation of the panel of switches of the electric drive of window regulators of a driver's door
13.3.7. Removal and installation of the panel of the ceiling console
13.3.8. Removal and installation of a combination of devices
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
14. Schemes of electric connections


 









13-3-2-gruppa-pereklyuchatelejj-sleva-na-paneli-priborov.html

13.3.2. Group of switches at the left on the dashboard

The structure of group includes switches of a choice of a mode of functioning of lighting devices, adjustments of provision of door rear-view mirrors and activation of faroomyvatel (see. Section Governing bodies and salon equipment).

Details of installation of group of switches at the left on the dashboard

1 — the Left bottom section of furnish of the dashboard
2 — Spring clamps

3 — the Screw
S1 — Group of switches at the left on the dashboard

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. Remove the left bottom section (1) furnish of the dashboard (see. Head Body).

Need for removal from the panel (1) module of management of the electronic switch of ignition (EIS/EZS) is absent.

  1. On models 463.246/249 of the corresponding complete set remove a knee emphasis (see. Head Body).
  2. Turn out a fixing bolt (3), wring out in the directions specified by shooters spring clamps (2) and, hooking a suitable wedge, liberate assembly of group of switches (S1) from the dashboard.
  3. Installation is made upside-down, - on models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  4. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also enter demanded base settings of the onboard equipment.


«previous page
13.3.1. Removal and installation of switches of a steering column
following page»
13.3.3. Removal and installation of the handle of the switch and actuation mechanisms of a drive of correction of provision of block headlights