Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.3.1. Removal and installation of switches of a steering column
13.3.2. Group of switches at the left on the dashboard
13.3.3. Removal and installation of the handle of the switch and actuation mechanisms of a drive of correction of provision of block headlights
13.3.4. Removal and installation of assembly of the top groups of switches of a console part of the dashboard
13.3.5. Removal and installation of the panel of switches of blocking of differentials
13.3.6. Removal and installation of the panel of switches of the electric drive of window regulators of a driver's door
13.3.7. Removal and installation of the panel of the ceiling console
13.3.8. Removal and installation of a combination of devices
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
14. Schemes of electric connections


 









13-3-1-snyatie-i-ustanovka-pereklyuchatelejj-rulevojj-kolonki.html

13.3.1. Removal and installation of switches of a steering column

The description of procedures of removal and installation of some switches is provided in heads of the Management devoted to the relevant systems of the car.

Removal and installation of switches of a steering column

Release models till 30.06.02

Details of installation of podrulevy switches on release models till 30.06.02

1 — Screws
2 — the Cover
3 — I Will corrode electroconductings
S4 — Combined podrulevy the switch

S4x1 — the Socket of electroconducting of the combined switch
S40/4 — the Switch темпостата / Speedtronic systems
S93/2 — the Linguatronic (VCS/SBS) system Switch

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. Remove a contact cable drum of a steering wheel (see. Head Suspension bracket and steering).
  2. Turn out screws (1) and remove from a cover (2) shirts of a steering column switches of Speedtronic systems (S40/4) and Linguatronic (S93/2).
  3. Unblock (arrows) and, having pulled towards a steering wheel, disconnect from a casing of the combined switch (S4) the socket (3).
  4. Remove the switch (S4) from a cover (2).
  5. Disunite the socket (S4x1).
  6. Installation is made upside-down, - on models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  7. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also enter demanded base settings of the onboard equipment.
  8. Make sure of serviceability of functioning of podrulevy switches.

Release models from 01.07.02

Switches темпостата / Speedtronic systems and adjustments of a steering column

Details of installation of the switch темпостата / Speedtronic systems and adjustments of a steering column on release models from 01.07.02

1 — the Screw
2 — Assembly of podrulevy switches
B24/8 — the Sensor of an angle of rotation of a steering wheel
S4 — Combined podrulevy the switch

S40/4 — the Switch темпостата / Speedtronic systems
S59 — the Switch of adjustment of a steering column

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. Remove a steering wheel and a contact cable drum (А45) (see. Head Suspension bracket and steering).
  2. Remove the sensor of an angle of rotation of a steering wheel (B24/8) (see. Head Suspension bracket and steering).
  3. Having pulled, liberate switches темпостата / Speedtronic systems (S40/4) and/or adjustment of a steering column (S59) from assembly (2).
  4. Installation is made upside-down, - do not forget to activate the sensor (B24/8), on models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  5. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also enter demanded base settings of the onboard equipment.
  6. Make sure of serviceability of functioning of podrulevy switches.

The module of a steering column and the combined switch

Details of installation of the module of a steering column and the combined podrulevy switch on release models since 01.07.02.

1, 4 — Screws
2 — the Coupling bolt
3 — Assembly of podrulevy switches
5, 6 — electroconducting Sockets
B24/8 — the Sensor of an angle of rotation of a steering wheel
N80 — the Module of a steering column

S4 — Combined podrulevy the switch
S40/4 — the Switch темпостата / Speedtronic systems
S59 — the Switch of adjustment of a steering column

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. Remove a contact cable drum of a steering wheel (see. Head Suspension bracket and steering).
  2. Remove the sensor of an angle of rotation of a steering wheel (B24/8) (see. Head Suspension bracket and steering).
  3. Remove switches темпостата / Speedtronic systems (S40/4) and adjustment of a steering column (S59) (see above).
  4. Turn out the coupling screw (2), - the screw remains in assembly of switches (3).
  5. Having pulled outside, liberate assembly of switches (3) of a shirt of a steering column.
  6. Turn out bolts (4) and remove the module (N80) from assembly (3).
  7. Separate from the module (N80) the combined switch (S4).
  8. Installation is made upside-down, - track reliability of a zashchelkivaniye of the socket (5/6).
  9. On models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  10. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also enter demanded base settings of the onboard equipment.
  11. Make sure of serviceability of functioning of podrulevy switches.


«previous page
13.3. Switches
following page»
13.3.2. Group of switches at the left on the dashboard