
Mercedes-Benz G-class (W463) since 1999 of release
	1. Introduction
	2. Governing bodies and operation receptions
	3. Current leaving and service
	4. Engine
	5. Systems of cooling, heating, ventilation and air conditioning
	6. A power supply system and production of the fulfilled gases
	7. Systems of electric equipment of the engine
	8. Automatic transmission
	9. Transmission line
	10. Brake and auxiliary systems
	11. Suspension bracket and steering
	12. Body
	13. Onboard electric equipment
		13.1. General information
		13.2. Assembly blocks and management modules
		13.3. Switches
			13.3.1. Removal and installation of switches of a steering column
			13.3.2. Group of switches at the left on the dashboard
			13.3.3. Removal and installation of the handle of the switch and actuation mechanisms of a drive of correction of provision of block headlights
			13.3.4. Removal and installation of assembly of the top groups of switches of a console part of the dashboard
			13.3.5. Removal and installation of the panel of switches of blocking of differentials
			13.3.6. Removal and installation of the panel of switches of the electric drive of window regulators of a driver's door
			13.3.7. Removal and installation of the panel of the ceiling console
			13.3.8. Removal and installation of a combination of devices
		13.4. Driving electromotors, sensors
		13.5. Alarm and lighting devices
		13.6. Systems of additional safety (SRS)
		13.7. Audiosystem, navigation and mobile phone
	14. Schemes of electric connections

13-3-4-snyatie-i-ustanovka-sborki-verkhnikh-grupp-pereklyuchatelejj-konsolnojj.html

13.3.4. Removal and installation of assembly of the top groups of switches of a console part of the dashboard

Details of installation of assembly of the top groups of switches of a console part of the dashboard


2 — Screws 3 — Sockets	N72/1 — Assembly of switches

PERFORMANCE ORDER

Remove the facing panel of console section of the dashboard (see. Head Body).
Disunite 2 (release models till 30.09.01)/3 (release models from 30.09.01) the socket (3) electroconductings.
Turn out fixing screws (2) and remove assembly of the top groups of switches (N72/1).
Installation is made upside-down.
In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. Head of System of electric equipment of the engine).