13-6-sistemy-dopolnitelnojj-bezopasnosti-srs.html
13.6. Systems of additional safety (SRS)
Removal and installation of modules of face-to-face safety cushions
|
The failed modules of safety cushions before utilization are subject an obligatory discharge, - address for the help to specialists of car-care center. |
Driver's safety cushion
Details of installation of the module of a driver's safety cushion on release models till 30.06.02
Details of installation of the module of a driver's safety cushion on release models from 01.07.02
|
- Shift a steering wheel against the stop back.
- On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
|
- Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.
|
|
- Turn out fixing bolts (2).
- On release models till 30.06.02 raise the module of a driver's safety cushion (1) and disunite the socket (5) of electroconducting of a multipurpose steering wheel (5). Also disconnect electroconducting from igniter (R12/13) of a safety cushion.
- On release models from 01.07.02 raise the module (1), release clamps (3) and disunite sockets (5) both igniters (R12/13 and R12/14), and also the socket (4) of a multipurpose steering wheel.
- Remove the module of a driver's safety cushion (1).
- Installation is made upside-down, - track reliability of fixing of contact sockets.
|
|
On release models from 01.07.02 joining of sockets (5) should be accompanied by distinct click. |
|
- On models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
- In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also execute procedures of base programming.
|
|
Passenger safety cushion
Details of installation of the module of a passenger face-to-face safety cushion
|
- On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
|
- Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.
|
|
- Remove a ware box (see. Head Body).
- Disconnect electroconducting from the initiator of a gas generator, - at connection track reliability of a zashchelkivaniye of the socket.
- Give nuts of screws of fastening of assembly brackets (1) (on two screws on each bracket).
- Turn out screws (3) fastenings of the handle established on the dashboard.
- Turn out screws (4) fastenings of the module of a passenger safety cushion (2) to a bearing arm of the dashboard.
- Remove the module (2) assembled with a basic arm.
- In case of need separate the module (2) from an arm.
- Installation is made upside-down, - at the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
- In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also execute procedures of base programming.
|
|
|
|