Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.6.1. Removal and installation of modules of face-to-face safety cushions
13.7. Audiosystem, navigation and mobile phone
14. Schemes of electric connections


 







13-6-1-snyatie-i-ustanovka-modulejj-frontalnykh-podushek-bezopasnosti.html

13.6.1. Removal and installation of modules of face-to-face safety cushions

Removal and installation of modules of face-to-face safety cushions

The failed modules of safety cushions before utilization are subject an obligatory discharge, - address for the help to specialists of car-care center.

Driver's safety cushion

Details of installation of the module of a driver's safety cushion on release models till 30.06.02

1 — the safety cushion Module
2 — Bolts
5 — the Contact socket of electroconducting of a steering wheel

R12/13 — Igniter

Details of installation of the module of a driver's safety cushion on release models from 01.07.02

1 — the safety cushion Module
2 — Bolts
3 — Clamps
4 — the Contact socket of electroconducting of a steering wheel

5 — the Contact socket of electroconducting of igniters
R12/13 — Igniter No. 1
R12/14 — Igniter No. 2

 PERFORMANCE ORDER

  1. Shift a steering wheel against the stop back.
  2. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. Turn out fixing bolts (2).
  2. On release models till 30.06.02 raise the module of a driver's safety cushion (1) and disunite the socket (5) of electroconducting of a multipurpose steering wheel (5). Also disconnect electroconducting from igniter (R12/13) of a safety cushion.
  3. On release models from 01.07.02 raise the module (1), release clamps (3) and disunite sockets (5) both igniters (R12/13 and R12/14), and also the socket (4) of a multipurpose steering wheel.
  4. Remove the module of a driver's safety cushion (1).
  5. Installation is made upside-down, - track reliability of fixing of contact sockets.

On release models from 01.07.02 joining of sockets (5) should be accompanied by distinct click.

  1. On models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  2. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also execute procedures of base programming.

Passenger safety cushion

Details of installation of the module of a passenger face-to-face safety cushion

1 — Assembly brackets
2 — the safety cushion Module

3, 4 — Screws

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. Remove a ware box (see. Head Body).
  2. Disconnect electroconducting from the initiator of a gas generator, - at connection track reliability of a zashchelkivaniye of the socket.
  3. Give nuts of screws of fastening of assembly brackets (1) (on two screws on each bracket).
  4. Turn out screws (3) fastenings of the handle established on the dashboard.
  5. Turn out screws (4) fastenings of the module of a passenger safety cushion (2) to a bearing arm of the dashboard.
  6. Remove the module (2) assembled with a basic arm.
  7. In case of need separate the module (2) from an arm.
  8. Installation is made upside-down, - at the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  9. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also execute procedures of base programming.


«previous page
13.6. Systems of additional safety (SRS)
following page»
13.7. Audiosystem, navigation and mobile phone