Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.3.1. Removal and installation of switches of a steering column
13.3.2. Group of switches at the left on the dashboard
13.3.3. Removal and installation of the handle of the switch and actuation mechanisms of a drive of correction of provision of block headlights
13.3.4. Removal and installation of assembly of the top groups of switches of a console part of the dashboard
13.3.5. Removal and installation of the panel of switches of blocking of differentials
13.3.6. Removal and installation of the panel of switches of the electric drive of window regulators of a driver's door
13.3.7. Removal and installation of the panel of the ceiling console
13.3.8. Removal and installation of a combination of devices
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
14. Schemes of electric connections


 







13-3-6-snyatie-i-ustanovka-paneli-pereklyuchatelejj-ehlektroprivoda-steklopodemnikov-voditelskojj-dveri.html

13.3.6. Removal and installation of the panel of switches of the electric drive of window regulators of a driver's door

Details of installation of the panel of switches of management of functioning of the electric drive of window regulators of a forward door

1 — the Panel of an internal upholstery
2 — Clamps

S20 — Group of switches

 PERFORMANCE ORDER

  1. Remove the panel of an internal upholstery of a door (see. Head Body).
  2. Release clamps (2).
  3. Having liberated from the panel of an upholstery of a driver's door (1), remove assembly of switches of the electric drive of window regulators (S20).
  4. Installation is made upside-down.


«previous page
13.3.5. Removal and installation of the panel of switches of blocking of differentials
following page»
13.3.7. Removal and installation of the panel of the ceiling console