Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
8.1. Specifications
8.2. Search of malfunctions - the general information
8.3. The general principles of functioning of a control system of the transmission, operating signals
8.4. Adjustment of a drive of switching of AT
8.5. Removal and installation of the electrohydraulic control unit by switchings
8.6. Removal and AT installation with the hydrotransformer
8.7. Removal and installation of the selector module (ESM)
8.8. Removal and installation of the sensor of target turns of AT
8.9. Removal and installation of a cooler of ATF
8.10. Washing of a cooler of ATF and oil pipelines
8.11. Removal and installation of the electronic module of management by transmission (TCM/ETC)
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







8-9-snyatie-i-ustanovka-okhladitelya-atf.html

8.9. Removal and installation of a cooler of ATF

Details of installation of a cooler of ATF (except models 463.246)

1 — the Cap nut of the shtutserny socket
2 — the Hollow bolt of shtutserny connection

3 — Nuts of fastening of a cooler of ATF
4 — ATF Cooler

Details of installation of a cooler of ATF (model 463.246)

1 — the Cap nut of the shtutserny socket
2 — the Hollow bolt of shtutserny connection
3 — Nuts of fastening of a cooler of ATF

4 — ATF Cooler
5 — the Basic arm

 PERFORMANCE ORDER

  1. Remove protection of a case (except models 463.246).
  2. Merge ATF (see. Head Current leaving and service).
  3. Release a cap nut (1) shtutserny socket on a cooler (4), - prepare for collecting spilled liquid.
  4. Turn out a hollow bolt (2) shtutserny connections on a cooler (4), - prepare for collecting spilled liquid.
  5. Release nuts (3) fastenings of a maslookhladitel (4).
  6. On models 463.266 (G55 AMG) delay from a cooler (4) basic arm (5).
  7. Remove a cooler (4), - prepare for collecting spilled liquid.
  8. Installation is made upside-down.


«previous page
8.8. Removal and installation of the sensor of target turns of AT
following page»
8.10. Washing of a cooler of ATF and oil pipelines