Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
8.1. Specifications
8.2. Search of malfunctions - the general information
8.3. The general principles of functioning of a control system of the transmission, operating signals
8.4. Adjustment of a drive of switching of AT
8.5. Removal and installation of the electrohydraulic control unit by switchings
8.6. Removal and AT installation with the hydrotransformer
8.7. Removal and installation of the selector module (ESM)
8.8. Removal and installation of the sensor of target turns of AT
8.9. Removal and installation of a cooler of ATF
8.10. Washing of a cooler of ATF and oil pipelines
8.11. Removal and installation of the electronic module of management by transmission (TCM/ETC)
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







8-11-snyatie-i-ustanovka-ehlektronnogo-modulya-upravleniya-transmissiejj-tcm-etc.html

8.11. Removal and installation of the electronic module of management by transmission (TCM/ETC)

TCM installation details

1 — Nuts
2 — electroconducting Sockets

N15/3 — TCM/ETC

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  2. Switch off ignition and take a key.
  3. Connect to the regular battery the auxiliary accumulator, then disconnect a negative wire.
  4. Remove the central console (see. Head Body).
  5. Disconnect electroconducting (2). Give nuts (1), remove TCM (N15/3) from fixing bolts, then submit it forward towards a passenger foot well.
  6. Installation is made upside-down, - at replacement of the module it is necessary to copy in it information from old TCM (use the STAR DIAGNOSIS scanner).
  7. In summary do not forget деактивировать a service mode of TELE AID system and to make cleaning of memory of the processor of system of onboard self-diagnostics (see. Head of System of electric equipment of the engine).


«previous page
8.10. Washing of a cooler of ATF and oil pipelines
following page»
9. Transmission line