Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
5.1. System of cooling of the engine
5.1.1. Antifreeze - means of protection from freezing
5.1.2. Replacement of cooling liquid - general comments
5.1.3. Check of a cover of system of cooling, replacement of hoses of system of cooling
5.1.4. Thermostat check
5.1.5. Removal and thermostat installation
5.1.6. Removal and installation of a radiator of system of cooling
5.1.7. Removal and installation of a broad tank
5.1.8. Removal and installation of assembly of the fan of system of cooling
5.1.9. Removal and installation of the water pump
5.1.10. Removal and installation of a low-temperature cooler (М612)
5.1.11. Removal and installation of a heater of the block of the engine (at the corresponding complete set)
5.1.12. Removal and installation of an additional heater of STH (at the corresponding complete set)
5.1.13. Removal and installation of the circulating pump of an additional heater of STH (at the corresponding complete set)
5.2. Systems of ventilation, heating and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







5-1-7-snyatie-i-ustanovka-rasshiritelnogo-bachka.html

5.1.7. Removal and installation of a broad tank

Petrol models

Details of installation of a broad tank on petrol models and diesel models with the engine of a series 628 (1 of 2)

1 — the Ventilating hose (2 pieces)
3 — Bolts

4 — the Broad tank

Details of installation of a broad tank on petrol models and diesel models with the engine of a series 628 (2 of 2)

2 — the Hose of an okhladitelny path
5 — Rubber support

6 — I Will corrode electroconductings of the sensor of level of cooling liquid

 PERFORMANCE ORDER

  1. Empty cooling system (see. Head Current leaving and service).
  2. Disconnect two ventilating hoses (1).
  3. Remove a hose of an okhladitelny path (2).
  4. Turn out bolts (3).
  5. Lift a broad tank (4) and liberate it from rubber support (5).
  6. Disconnect electroconducting from the sensor of level of cooling liquid (6).
  7. Remove a broad tank (4).
  8. Installation is made upside-down.
  9. In summary check cooling system on existence of signs of development of leaks.

Diesel models

М612

Details of installation of a broad tank on diesel models with the M612 engine

1 — Ventilating hoses
2, 7 — the Hose of an okhladitelny path
3 — the Bolt
4 — the Broad tank

5 — Rubber support
6 — I Will corrode electroconductings of the sensor of level of cooling liquid

 PERFORMANCE ORDER

  1. Remove protection of a case.
  2. Further act according to the instructions provided above in paragraphs with 1 on 9.

М628

 PERFORMANCE ORDER

  1. On diesel, equipped with the series 628 engine, the broad tank fastens also, as on petrol models (see above).


«previous page
5.1.6. Removal and installation of a radiator of system of cooling
following page»
5.1.8. Removal and installation of assembly of the fan of system of cooling