Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
13.7.1. Removal and radio receiver installation.
13.7.2. Removal and CD changer / TV tuner installation
13.7.3. Removal and installation of antenna amplifiers
13.7.4. Removal and installation of antenna knots
13.7.5. Removal and installation of an antenna divider
13.7.6. Removal and installation of loudspeakers
13.7.7. Removal and installation of the transceiver of Handsfree system of mobile telecommunication
13.7.8. Removal and installation of the interface of the mobile phone
13.7.9. Removal and installation of the holder of the cell phone
14. Schemes of electric connections


 







13-7-8-snyatie-i-ustanovka-interfejjsa-mobilnogo-telefona.html

13.7.8. Removal and installation of the interface of the mobile phone

Details of installation of the interface of the mobile phone

1 — the Basic arm
2 — I Will corrode electroconductings
3 — the Socket for connection of a fiber-optical cable

A34/4 — the CTEL Interface
N15/3 — TCM/ETC

The stated material belongs to the models equipped with mobile telecommunication on the basis of the devices Nokia 6210 and 3110 (codes of a complete set of ET7, EV7, EH1 and ЕV8).

 PERFORMANCE ORDER

  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. Remove assembly of the central console (see. Head Body).
  2. Without disconnecting electroconducting, separate from a basic arm (1) module of management of AT (N15/13) (see. Head Automatic transmission).
  3. Remove a basic arm (1).
  4. Disunite on the module of the CTEL interface (A34/4) the socket of connection of a fiber-optical cable, - at once закупорьте wave guides special lightproof caps.
  5. Disunite the socket of electroconducting (2).
  6. Remove the interface module (A34/4).
  7. Installation is made upside-down.
  8. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. Head of System of electric equipment of the engine).


«previous page
13.7.7. Removal and installation of the transceiver of Handsfree system of mobile telecommunication
following page»
13.7.9. Removal and installation of the holder of the cell phone