Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
13.7.1. Removal and radio receiver installation.
13.7.2. Removal and CD changer / TV tuner installation
13.7.3. Removal and installation of antenna amplifiers
13.7.4. Removal and installation of antenna knots
13.7.5. Removal and installation of an antenna divider
13.7.6. Removal and installation of loudspeakers
13.7.7. Removal and installation of the transceiver of Handsfree system of mobile telecommunication
13.7.8. Removal and installation of the interface of the mobile phone
13.7.9. Removal and installation of the holder of the cell phone
14. Schemes of electric connections


 









13-7-2-snyatie-i-ustanovka-cd-chejjndzhera-tv-tyunera.html

13.7.2. Removal and CD changer / TV tuner installation

CD changer (code of a complete set of EP5)

Details of installation of a CD changer on an example of the Versatile person models (1 of 2)

2 — Fixing nuts
A2/6 — a CD changer

A2/42 — the TV tuner

Details of installation of a CD changer on an example of the Versatile person models (2 of 2)

4 — the Socket of a plait of giving of a food to a CD changer

5 — the Socket of a fiber-optical cable

 PERFORMANCE ORDER

  1. Take from a CD changer charging shop.
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. On models of the corresponding complete set (EM9 code) remove the TV tuner (A2/42) (see below).
  2. Release four fixing nuts (2), disunite sockets (4 and 5) on the back parties of assembly of a CD changer (A2/6) and remove the last.

At once закупорьте wave guides of the socket of connection of a fiber-optical cable (5) special lightproof caps.

  1. Installation is made upside-down.
  2. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also execute procedures of base programming.

TV tuner (code of a complete set of EM9)

Details of installation of the TV tuner (1 of 2)

And — the cover Equipped with a vetrootboynik

In — the Support of a vetrootboynik

Details of installation of the TV tuner (2 of 2)

1 — the Plastic frame under CD changer installation
2 — the Carpet panel
3 — Fixing screws

A2/42 — the TV tuner
X1/27 — the Antenna socket
X1/28 — I Will corrode electroconductings

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding

  1. On models of the corresponding complete set (V57 code) uncover a luggage compartment.
  2. Remove the cover equipped with a vetrootboynik (And), - on three push-button clamps from each party.
  3. Remove the left basic arm (In) a vetrootboynik.
  4. On models of the corresponding complete set (V53 code) remove the left ware compartment.
  5. On models of the corresponding complete set (EP5 code) remove a plastic frame (1) under CD changer installation (see above).
  6. Having slightly raised the panel of lateral furnish, remove a carpet upholstery (2) arches of the left wheel.
  7. Turn out two fixing screws and remove the adjacent panel of a carpet upholstery of a floor.
  8. Disunite sockets of an antenna cable (X1/27) and electroconductings (X1/28).
  9. Turn out four fixing screws (3) and remove the TV tuner (A2/42).
  10. Installation is made upside-down, - on models of the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  11. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. Head of System of electric equipment of the engine).


«previous page
13.7.1. Removal and radio receiver installation.
following page»
13.7.3. Removal and installation of antenna amplifiers