Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.2.1. General information
11.2.2. Removal and installation of assembly of the forward bridge
11.2.3. Removal, check and installation of forward shock-absorbers
11.2.4. Removal and installation of springs of a forward suspension bracket
11.2.5. Removal and installation of the forward stabilizer of cross-section stability
11.2.6. Removal and installation of longitudinal levers of a suspension bracket
11.2.7. Replacement of the rubber plug of the longitudinal lever
11.3. Back suspension bracket
11.4. Steering
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









11-2-6-snyatie-i-ustanovka-prodolnykh-rychagov-podveski.html

11.2.6. Removal and installation of longitudinal levers of a suspension bracket

Details of installation of the longitudinal lever of a forward suspension bracket

1 — the Longitudinal lever
2 — the Frame
3 — the Bridge
4 — the Stabilizer of cross-section stability

5 — Connecting draft of a steering drive
6 — Koronchataya a nut

The scheme of fastening of a steering damper to connecting draft

7 — the Nut


 PERFORMANCE ORDER

  1. Release a nut (7) fastenings of a steering damper to connecting draft.
  2. To Otboltita the longitudinal lever (1) from the bridge (3).
  3. To Otboltita from the lever (1) штагу the stabilizer of cross-section stability (4) (see. Section Removal and installation of the forward stabilizer of cross-section stability).
  4. Take шплинт and release a koronchaty nut (6) fastenings of connecting steering draft (5) to the rotary lever.
  5. Vypressuyte draft (5) from the rotary lever.
  6. Remove the longitudinal lever (1).
  7. Installation is made upside-down.


«previous page
11.2.5. Removal and installation of the forward stabilizer of cross-section stability
following page»
11.2.7. Replacement of the rubber plug of the longitudinal lever