Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.2.1. General information
11.2.2. Removal and installation of assembly of the forward bridge
11.2.3. Removal, check and installation of forward shock-absorbers
11.2.4. Removal and installation of springs of a forward suspension bracket
11.2.5. Removal and installation of the forward stabilizer of cross-section stability
11.2.6. Removal and installation of longitudinal levers of a suspension bracket
11.2.7. Replacement of the rubber plug of the longitudinal lever
11.3. Back suspension bracket
11.4. Steering
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 







11-2-5-snyatie-i-ustanovka-perednego-stabilizatora-poperechnojj-ustojjchivosti.html

11.2.5. Removal and installation of the forward stabilizer of cross-section stability

Details of installation of the forward stabilizer of cross-section stability

1 — a stabilizer Bar
2 — a stabilizer Rack
3 — the Fixing collar

4 — the Rubber plug
5 — the Longitudinal lever of a suspension bracket

 PERFORMANCE ORDER

  1. Release fixing nuts and disconnect collars (3) from longitudinal levers (5) of a suspension bracket. Estimate a condition of rubber plugs (4), in case of need prepare replaceable elements.
  2. Give nuts of bolts of fastening of a bar (1) stabilizer to racks (2). Take bolts and remove a bar (1).
  3. Installation is made upside-down.

Before installation of a bar (1) it is necessary to weaken the top fixture of racks (2).



«previous page
11.2.4. Removal and installation of springs of a forward suspension bracket
following page»
11.2.6. Removal and installation of longitudinal levers of a suspension bracket