Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
7.1. Ignition and engine management systems
7.1.1. Main data and security measures
7.1.2. Checks of a control system by ignition and injection
7.1.3. Search of malfunctions - the general information and preliminary checks
7.1.4. Check and adjustment of a corner of an advancing of ignition
7.1.5. Spark plugs
7.1.6. Removal and installation of coils of ignition, - petrol models
7.1.7. Removal and installation of the sensor of provision of a cranked shaft (CKP)
7.1.8. Removal and installation of the sensor of the Hall of a camshaft
7.1.9. Removal and installation of sensors of a detonation (KS), - petrol engines
7.2. System of preheat of the diesel engine
7.3. Diagnostics of systems of electronic control and diagnostic equipment
7.4. Charging and start systems
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 


7-1-8-snyatie-i-ustanovka-datchika-kholla-raspredelitelnogo-vala.html

7.1.8. Removal and installation of the sensor of the Hall of a camshaft

Petrol engines

Location of the sensor of the Hall (B6/1) of a camshaft of petrol engines

Diesel engines (М612)

Details of installation of the sensor of the Hall (B6/1) of a camshaft of diesel M612 engines

 PERFORMANCE ORDER

  1. Open a cowl and fix it in vertical situation.
  2. Remove panels of furnish of a cover of a head of cylinders.
  3. Disunite the contact socket of electroconducting (1).
  4. Turn out a fixing bolt (2) and remove the sensor of the Hall (B6/1).
  5. Installation is made upside-down, - do not forget to replace a sealing ring.

«previous page
7.1.7. Removal and installation of the sensor of provision of a cranked shaft (CKP)		 following page»
7.1.9. Removal and installation of sensors of a detonation (KS), - petrol engines