Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.3. Back suspension bracket
11.4. Steering
11.5. Suspension bracket geometry
11.5.1. Corners of installation of wheels of the car - the general information
11.5.2. Adjustment of convergence of forward wheels
11.5.3. Determination of the demanded size выбега
11.5.4. Check and adjustment of limiting angles of rotation of forward wheels
11.5.5. Check of size of wheel base
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









11-5-3-opredelenie-trebuemojj-velichiny-vybega.html

11.5.3. Determination of the demanded size выбега

Removal of the first control measurement at determination of size выбега

1 — Peredny Bridge
2 — Bottom edge of a frame
3 — the Bolt of the longitudinal lever

Removal of the second control measurement at determination of size выбега

4 — Zadny Bridge
5 — a frame Beam
6 — the Bolt of the longitudinal lever


 PERFORMANCE ORDER

  1. Measure distance between the center of a bolt (3) longitudinal levers on the forward bridge (1) and bottom edge of a frame (2).
  2. Measure distance between the center of a bolt (6) longitudinal levers on the back bridge (4) and bottom edge of a beam (5).
  3. Using the corresponding nomogram (see. Specifications), define the demanded size выбега, defined in the size of a course of springs of a suspension bracket.


«previous page
11.5.2. Adjustment of convergence of forward wheels
following page»
11.5.4. Check and adjustment of limiting angles of rotation of forward wheels