Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
1.1. About this Management
1.2. G-class Mercedes-Benz cars - the summary
1.3. Identification numbers of the car
1.4. Acquisition of spare parts
1.5. Poddomkrachivaniye / posting of the car and transportation in case of failure
1.6. Engine start from the auxiliary power supply
1.7. Diagnostics of malfunctions
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections



1. Introduction

About this Management


This Management was made to help on purpose to the owner of the car to receive from it the maximum return. Performance of this task is reached by several ways. The data collected and presented below allow the owner of a vehicle to be defined in what works on its service should be carried out and when, and also whether has sense to try to execute them independently, or it is necessary to address in representation office of manufacturing firm or a car-care center workshop. Descriptions of procedures of obligatory routine maintenance and car repairs are included in the Management and the schedule of their performance is provided. Besides, information on carrying out diagnostics of malfunctions of knots and car systems, and also ways of elimination of their reasons is offered.

Instructions for use Management

The management is divided into chapters. Each head is broken into sections. Sections, in turn, break into subsections and where it is required, on under - subsections and consist of paragraphs.

The text brought to attention is accompanied by explanatory illustrations.

The description once the procedures mentioned in the text usually the second time does not repeat. Instead the reference to the corresponding section/subsection of the corresponding chapter where this procedure already met in case of need becomes.

References to the provision of knot or component at the left or on the right on the car mean stay by the person forward on a driver's place.

Descriptions of all procedures in this Management are stated in a simple and available form. If accurately to follow instructions in the text and the accompanying illustrations, no difficulties should arise.

It is necessary to give due consideration to observance of technical requirements and the moments of a tightening of the carving connections given in Specifications at the beginning of each chapter. It is necessary to be guided by specifications at performance of all works. In separate sections the necessary sizes and values for adjustment are given not always.

The elementary operations, such as «to open a cowl» or «to weaken wheel nuts», are meant as self-evident and also are mentioned not always. On the contrary, in the text the most difficult procedures needing the detailed description are in detail stated.

Designations in drawings

— A tightening make the specified moment

— Pay attention to correctness of actions and the provision of a detail

— Use the special tool

— Visually check

— Use the measuring tool

— Pay attention

— Prepare drain capacity

  following page»
1.1. About this Management