Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
7.1. Ignition and engine management systems
7.2. System of preheat of the diesel engine
7.2.1. General information
7.2.2. Check of candles of an incandescence
7.2.3. Removal and installation of candles of an incandescence
7.3. Diagnostics of systems of electronic control and diagnostic equipment
7.4. Charging and start systems
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









7-2-3-snyatie-i-ustanovka-svechejj-nakalivaniya.html

7.2.3. Removal and installation of candles of an incandescence

Details of installation of candles of an incandescence of the diesel engine

 PERFORMANCE ORDER

  1. Start the engine and warm up it to normal working temperature (about 80°С).

The reversing of candles should be made only after complete warming up of a head of cylinders!

  1. Muffle the engine.
  2. Disconnect from the fuel distributive highway going to TNVD returnable топливопровод.
  3. Disconnect electroconducting (3) (see. The section Check of candles of an incandescence) and by means of the special adaptation (HAZET 4760-1) turn out candles (R9).
  4. Installation is made upside-down, - do not forget to clean previously candle niches a special perlonovy brush in diameter of 10 or 6 mm.
  5. In summary start the engine and check a power supply system on existence of signs of development of leaks.


«previous page
7.2.2. Check of candles of an incandescence
following page»
7.3. Diagnostics of systems of electronic control and diagnostic equipment