Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.2.1. Check and adjustment of quantity of turns of the idling / the moment of ignition / concentration WITH
6.2.2. Sbrasyvaniye of pressure in fuel system of the petrol engine
6.2.3. Principle of functioning of a control system and injection of the petrol engine
6.2.4. General check of system of injection of the petrol engine
6.2.5. Check of injectors
6.2.6. Removal and installation of components of an inlet air path
6.2.7. Service of elements of a drive of a butterfly valve
6.2.8. Oporozhneniye of a fuel tank
6.2.9. Removal and installation of the fuel pump
6.2.10. Removal and installation of the sensor of a stock of fuel
6.2.11. Removal and installation of the fuel distributive highway and injectors
6.2.12. Removal and installation of a fuel tank
6.2.13. Removal and installation of the module of management by injection of fuel (ECM ME-SFI)
6.3. Power supply system of diesel engines
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









6-2-sistema-pitaniya-benzinovykh-dvigatelejj.html

6.2. Power supply system of petrol engines

Check and adjustment of quantity of turns of the single course / the moment of ignition/concentration WITH

Within maintenance adjustment of number of turns of idling, the ignition and concentration moment WITH is not made, since the specified parameters are established by a control system depending on the requirements dictated by the current service conditions.

From nominal rates malfunction of components which it is necessary to replace can be a reason for rejection of the actual parameters. The qualified check of a control system demands use of special diagnostic devices.

The quantity of turns of idling can be a little changed by a way of reprogramming of the module of management by means of the diagnostic scanner (STAR DIAGNOSIS).



«previous page
6.1. General information and security measures
following page»
6.2.1. Check and adjustment of quantity of turns of the idling / the moment of ignition / concentration WITH