6-2-10-snyatie-i-ustanovka-datchika-zapasa-topliva.html

6.2.10. Removal and installation of the sensor of a stock of fuel

Details of installation of the sensor of a stock of fuel (all models)

1 — the Fuel tank 2 — the Sensor of a stock of fuel 3 — the Sealing ring	4 — Soaking up топливопровод 5 — the Ventilating hose 6 — electroconducting Sockets

PERFORMANCE ORDER

On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID). Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire. 7 — the Auxiliary accumulator 8 — the Plug of a positive wire of the module 9 — the Plug of a negative wire of the module W10 — battery Grounding If the fuel tank (1) is filled, pump out from it about 8 liters of fuel (see. Undressed Oporozhneniye of a fuel tank). Remove the panel carpet a covering in a luggage compartment of the car. Unscrew a cover of the sensor of a stock of fuel (2). Disconnect from the sensor (2) soaking up топливопровод (4) and a ventilating hose (5), - закупорьте the open ends of unions. Disconnect electroconducting (6) and take assembly of the sensor (2) of a fuel tank. Installation is made upside-down. In summary деактивируйте a service mode of TELE AID system (see. The section Activation/deactivation of a service mode of system of an emergency call of TELE AID) also make cleaning of memory of the processor of system of onboard self-diagnostics (see. Head of System of electric equipment of the engine).