Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
5.1. System of cooling of the engine
5.1.1. Antifreeze - means of protection from freezing
5.1.2. Replacement of cooling liquid - general comments
5.1.3. Check of a cover of system of cooling, replacement of hoses of system of cooling
5.1.4. Thermostat check
5.1.5. Removal and thermostat installation
5.1.6. Removal and installation of a radiator of system of cooling
5.1.7. Removal and installation of a broad tank
5.1.8. Removal and installation of assembly of the fan of system of cooling
5.1.9. Removal and installation of the water pump
5.1.10. Removal and installation of a low-temperature cooler (М612)
5.1.11. Removal and installation of a heater of the block of the engine (at the corresponding complete set)
5.1.12. Removal and installation of an additional heater of STH (at the corresponding complete set)
5.1.13. Removal and installation of the circulating pump of an additional heater of STH (at the corresponding complete set)
5.2. Systems of ventilation, heating and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









5-1-11-snyatie-i-ustanovka-obogrevatelya-bloka-dvigatelya-pri-sootvetstvuyushhejj-komplektacii.html

5.1.11. Removal and installation of a heater of the block of the engine (at the corresponding complete set)

Details of installation of a heater of the block of the engine (models 463.322/323, HP1 code)

1 — I Will corrode electroconductings
2 — the Spring clamp
3 — the Cover
4 — Elektroprovodka of a heater of the block of the engine

5 — the Bandage
6 — the Collar
7 — the Basic arm
8 — the Heater of the block of the engine

 PERFORMANCE ORDER

  1. On models with the ET2 code activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  2. Disconnect a negative wire from the battery.
  3. To Poddomkratta the car also establish it on props.
  4. Remove protection of a case.
  5. Having turned to the first emphasis a cover of system of cooling, dump residual pressure in an okhladitelny path.
  6. Empty cooling system (see. Head Current leaving and service).
  7. Remove an additional heater (see. The section Removal and installation of the circulating pump of an additional heater of STH (at the corresponding complete set)).
  8. Remove the air distributor (see. Head of the Power supply system and production of the fulfilled gases).
  9. Liberate the socket (1) of a spring clamp (2), then uncover (3).
  10. For the purpose of release of a plait of electroconducting (4) heaters release a bandage (5) and remove a collar (6) from a basic arm (7), - the bandage is subject to replacement without fail.
  11. Remove heater assembly (8), - prepare a replaceable sealing ring.
  12. Installation is made upside-down.
  13. In case of need add fresh liquid in the GUR tank and pump over a hydraulic path of the steering amplifier.
  14. Remove air from a path of system of cooling (see. Head the Current leaving and service) also check the corresponding components on existence of signs of development of leaks.
  15. On models with the ET2 code деактивируйте a service mode of TELE AID system (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  16. In summary make cleaning of memory of the processor of system of onboard self-diagnostics (see. Head of System of electric equipment of the engine).


«previous page
5.1.10. Removal and installation of a low-temperature cooler (М612)
following page»
5.1.12. Removal and installation of an additional heater of STH (at the corresponding complete set)