Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
13.7.1. Removal and radio receiver installation.
13.7.2. Removal and CD changer / TV tuner installation
13.7.3. Removal and installation of antenna amplifiers
13.7.4. Removal and installation of antenna knots
13.7.5. Removal and installation of an antenna divider
13.7.6. Removal and installation of loudspeakers
13.7.7. Removal and installation of the transceiver of Handsfree system of mobile telecommunication
13.7.8. Removal and installation of the interface of the mobile phone
13.7.9. Removal and installation of the holder of the cell phone
14. Schemes of electric connections


 






Интересное на АленаШик здесь: https://alyonashik.ru



13-7-6-snyatie-i-ustanovka-gromkogovoritelejj.html

13.7.6. Removal and installation of loudspeakers

Central loudspeaker of the dashboard

Details of installation of the central loudspeaker on the dashboard

1, 2 — electroconducting Sockets
3, 5 — Bolts

4 — the Panel
H4/27 — the Central loudspeaker

 PERFORMANCE ORDER

  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. Remove from the dashboard the central deflectors (see. Head Body).
  2. Turn out fixing screws (5) and remove the panel (4).
  3. Disunite sockets (1 and 2).
  4. Turn out fixing bolts (3) and remove the central loudspeaker (H4/27).
  5. Installation is made upside-down.
  6. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. Head of System of electric equipment of the engine).

High-frequency loudspeakers

Details of VCh installation of loudspeakers

1 — Bolts
H4/1h1 — the Left VCh the loudspeaker

H4/2h1 — the Right VCh the loudspeaker

 PERFORMANCE ORDER

  1. Remove from the dashboard lateral deflectors (see. Head Body).
  2. Turn out fixing screws (1) and remove from dynamics VCh dashboard (H4/1h1 and H4/2h1).
  3. Disconnect from loudspeakers electroconducting.
  4. Installation is made upside-down.

Door loudspeakers

Forward doors

Details of installation of a loudspeaker of a forward door

1 — the Socket
2 — Bolts
H4/1 — the Loudspeaker of the left door

H4/2 — the Loudspeaker of the right door

 PERFORMANCE ORDER

  1. Remove the panel of an internal upholstery of a door (see. Head Body).
  2. Disconnect from a loudspeaker electroconducting, - the socket (1).
  3. Turn out fixing screws (2) and remove a door loudspeaker (H4/1 or H4/2).
  4. Installation is made upside-down, - track correctness of placement of a loudspeaker on a door.

Back doors

Details of installation of a loudspeaker of a back door

1 — the Socket
2 — Bolts
H4/5 — the Loudspeaker of the left door

H4/6 — the Loudspeaker of the right door

The order of performance of procedure is similar described above for loudspeakers of forward doors.

LF loudspeaker (vufer of an audiosystem of Harman/Kardon) (code of complete set Е66)

Details of LF installation of a loudspeaker (vufer) of an audiosystem of Harman/Kardon

1 — the Protective lattice
2, 3 — Bolts
4 — I Will corrode electroconductings

And — Chashkoderzhatel
H4/29 — LF a loudspeaker (vufer)

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (FG2 code) remove a back chashkoderzhatel.
  2. Turn out fixing screws (2) and remove a protective lattice (1).
  3. Turn out screws (3) and remove LF a loudspeaker (H4/29).
  4. Disunite sockets (4) electroconductings.
  5. Installation is made upside-down.


«previous page
13.7.5. Removal and installation of an antenna divider
following page»
13.7.7. Removal and installation of the transceiver of Handsfree system of mobile telecommunication