Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
13.7.1. Removal and radio receiver installation.
13.7.2. Removal and CD changer / TV tuner installation
13.7.3. Removal and installation of antenna amplifiers
13.7.4. Removal and installation of antenna knots
13.7.5. Removal and installation of an antenna divider
13.7.6. Removal and installation of loudspeakers
13.7.7. Removal and installation of the transceiver of Handsfree system of mobile telecommunication
13.7.8. Removal and installation of the interface of the mobile phone
13.7.9. Removal and installation of the holder of the cell phone
14. Schemes of electric connections


 









13-7-4-snyatie-i-ustanovka-antennykh-uzlov.html

13.7.4. Removal and installation of antenna knots

The aerial of the cell phone established on a roof (code of a complete set of EV5)

Details of installation of the stationary aerial of the cell phone (code of a complete set of EV5)

1 — the Socket
2 — the Clamp
3 — the Protective cover

A2/22 — the Aerial
N70 — the Panel of the ceiling console

 PERFORMANCE ORDER

  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. Remove the panel of the ceiling console (N70) (see. Section Removal and installation of the panel of the ceiling console).
  2. Disunite the socket (1) electroconducting of the top telephone aerial (A2/22).
  3. Dismantle a clamp (2).
  4. Remove a protective cover (3), then by means of a special stripper (210 589 04 33 00) liberate and remove antenna knot (A2/22).
  5. Installation is made upside-down, - the special opravka is applied to landing of a protective cover (3) (210 589 05 33 00).
  6. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. Head of System of electric equipment of the engine).

External aerial of a radio receiver / cell phone (Cabriolet model)

Details of installation of external antenna knot on models the Cabriolet of the corresponding complete set (the EF1 ÷ EF4 codes and EF7)

1 — the Antenna cable
2 — the Screw
3 — the Nut

4 — the Holder
А28 — Antenna knot

The antenna knot considered here is used on the Cabriolet models equipped with audiosystems of Audio type of 10/30 RDS and Handsfree system for portable Nokia 6210 phones (codes of a complete set of EF1 ÷ EF4 and EF7).

 PERFORMANCE ORDER

  1. Turn out antenna knot (А28).
  2. Remove a loker of protection of an arch of the right forward wheel.
  3. Turn out a steering wheel against the stop to the right.
  4. Having used a wrench, through a wheel arch disconnect an antenna cable (1) from the screw (2).
  5. Законтрив from below a nut (3), turn out the screw (2).
  6. Remove the holder (4) and a nut (3).
  7. Installation is made upside-down.

Forward aerial of system of global positioning (GPS)

Details of installation of the aerial of system of navigation of GPS

1 — the Forward lattice
2 — a block headlight Cover
3 — the Fixing nut

A2/23x1 — the GPS Socket
A2/23 — the GPS Aerial

 PERFORMANCE ORDER

  1. Remove a forward lattice (1) and a facing cover (2) left block headlights (see. Head Body).
  2. Disunite the socket (A2/23x1).
  3. Release a fixing nut (3) and remove antenna knot (A2/23).
  4. Installation is made upside-down.


«previous page
13.7.3. Removal and installation of antenna amplifiers
following page»
13.7.5. Removal and installation of an antenna divider