Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.5. Alarm and lighting devices
13.5.1. Removal and installation of block headlights, replacement of lamps, adjustment of the direction of optical axes
13.5.2. Removal and installation of the back combined lamps
13.5.3. Removal and installation of indexes of turns
13.5.4. Removal and installation of a stoplight of the top level
13.5.5. Removal and installation of fog lights
13.5.6. Replacement of lamps of internal lighting
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
14. Schemes of electric connections


 









13-5-6-zamena-lamp-vnutrennego-osveshheniya.html

13.5.6. Replacement of lamps of internal lighting

Main salonny lamp

Replacement of a lamp of the main salonny lamp

1 — the Plafond
2 — Samples
3 — Landing uvulas
4 — Directing grooves

N70 — the Panel of the ceiling console
N70е1 — the Lamp of the main salonny lamp

 PERFORMANCE ORDER

  1. Having hooked a screw-driver through samples (2) and having liberated landing uvulas (3) of directing grooves (4), remove a plafond (1) main thing of the salonny lamp.
  2. Through a pure dry napkin grasp a lamp (N70е1) and liberate it from contact clips.
  3. Installation is made upside-down, - track correctness of hit of landing uvulas (3) plafonds (1) in directing grooves (4) console panels (N70).

The forward directed lamps (lamps for reading)

Replacement of lamps of the forward directed lamps

1 — the Boss

N70 — the Panel of the ceiling console

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. Remove the panel of the ceiling console (N70) (see. Section Removal and installation of the panel of the ceiling console).
  2. Having turned in the direction specified by shooters, remove a cartridge (1) corresponding lamp.
  3. Through a pure dry napkin grasp a lamp and liberate it from contact clips.
  4. Installation is made upside-down, - at the corresponding complete set (ET2 code) деактивируйте a service mode of TELE AID system see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  5. In summary make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see. The head of System of electric equipment of the engine) also execute procedures of base programming.

Back salonny lamps (Versatile person models)

Replacement of a lama of the back salonny lamp

2 — the Socket
3 — the Lamp
E15/8 — the Left back salonny lamp

E15/9 — the Right back salonny lamp

 PERFORMANCE ORDER

  1. Having released clamps, liberate assembly of the back lamp (E15/8 or E15/9) from the panel of a ceiling upholstery.
  2. Disunite the socket (2) electroconductings.
  3. Through a pure dry napkin grasp a lamp and liberate it from contact clips.
  4. Installation is made upside-down.

The back directed lamps (Versatile person models)

Replacement of lamps of the back directed lamps (E11/1 and E11/2)

 PERFORMANCE ORDER

  1. Hooking a long wedge, accurately liberate the lamp (E11/1 or E11/2) from the panel of a ceiling upholstery, trying not to damage the last.
  2. Through a pure dry napkin grasp a lamp and liberate it from contact clips.
  3. Installation is made upside-down.

Lamp of illumination of a ware box

Replacement of a lamp (1) illumination of a ware box

 PERFORMANCE ORDER

  1. Open a cover of a ware box and accurately liberate a lamp from clamps.
  2. Through a pure dry napkin grasp a lamp and liberate it from contact clips.
  3. Installation is made upside-down.


«previous page
13.5.5. Removal and installation of fog lights
following page»
13.6. Systems of additional safety (SRS)