Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
12. Body
13. Onboard electric equipment
13.1. General information
13.2. Assembly blocks and management modules
13.3. Switches
13.4. Driving electromotors, sensors
13.4.1. Removal and installation of electromotors of a drive of screen wipers
13.4.2. Removal and installation of activators of the uniform lock
13.4.3. Removal and installation of electromotors of a drive of adjustment of forward seats
13.4.4. Removal and installation of sensors
13.5. Alarm and lighting devices
13.6. Systems of additional safety (SRS)
13.7. Audiosystem, navigation and mobile phone
14. Schemes of electric connections


 









13-4-3-snyatie-i-ustanovka-ehlektromotorov-privoda-regulirovki-perednikh-sidenijj.html

13.4.3. Removal and installation of electromotors of a drive of adjustment of forward seats

Back and head restraint electric drive

Details of installation of electromotors of a drive of adjustment of a back and head restraint of a forward seat

1 — the Cover
2 — the Slip
3, 4 — Screws
5 — the Screw-driver
M27/4 — the Motor of a drive of adjustment of a head restraint of the left seat

M28/4 — the Motor of a drive of adjustment of a head restraint of the right seat
M27/5 — the Motor of a drive of adjustment of a back of the left seat
M27/6 — the Motor of a drive of adjustment of a back of the right seat

 PERFORMANCE ORDER

  1. Remove assembly of a forward seat (see. Head Body).
  2. Turn out fixing screws and remove a back upholstery of a back.
  3. Remove a head restraint.
  4. Disconnect electroconducting from the electromotor of a drive of adjustment of a head restraint (M27/4 or M28/4).
  5. Having shifted to the right, through a bottom of a back remove the electromotor (M27/4 or M28/4).
  6. Turn out fixing screws (3) and remove a decorative slip (2).
  7. On the right side disconnect a cover (1) back.
  8. Turn out the screws (4) located on the right, remove the electromotor of a drive of adjustment of a back (M27/5 or M28/5) and disconnect from it electroconducting.
  9. Installation is made upside-down.

Pillow electric drive

Details of installation of electromotors of a drive of adjustment of a pillow of a forward seat

1 — the Slip
2, 3, 4 — Screws
M27/1 — the Motor of a drive of adjustment of a pillow of the left seat in the longitudinal direction
M28/1 — the Motor of a drive of adjustment of a pillow of the right seat in the longitudinal direction
M27/2 — the Motor of a drive of adjustment of back edge of a pillow of the left seat in the vertical direction
M28/2 — the Motor of a drive of adjustment of back edge of a pillow of the right seat in the vertical direction

M27/3 — the Motor of a drive of adjustment of a first line of a pillow of the left seat in the vertical direction
M28/3 — the Motor of a drive of adjustment of a first line of a pillow of the right seat in the vertical direction
N32/1 — the control unit of adjustment of situation of a driver's seat Equipped with memory (and a steering column)
N32/2 — the control unit of adjustment of situation of a passenger seat Equipped with memory

 PERFORMANCE ORDER

  1. Remove assembly of a forward seat (see. Head Body).
  2. Separate the control unit of adjustment of situation of a seat equipped with memory (N32/1 or N32/2) and disconnect from it electroconducting, - prepare replaceable obvyazny bandages.
  3. Turn out screws (2) and remove the driving electromotor (M27/1 or M28/1).
  4. Remove a slip (1), turn out screws (3) and remove the electromotor (M27/2 or M28/2).
  5. For removal of motors (M27/3 or M28/3) turn out screws (4).
  6. Installation is made upside-down.


«previous page
13.4.2. Removal and installation of activators of the uniform lock
following page»
13.4.4. Removal and installation of sensors