Mercedes-Benz G-class (W463) since 1999 of release
1. Introduction
2. Governing bodies and operation receptions
3. Current leaving and service
4. Engine
5. Systems of cooling, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Automatic transmission
9. Transmission line
10. Brake and auxiliary systems
11. Suspension bracket and steering
11.1. Specifications
11.2. Forward suspension bracket
11.3. Back suspension bracket
11.4. Steering
11.4.1. General information
11.4.2. Check of a pressure of the steering pump
11.4.3. Check and adjustment of the hydraulic limiter
11.4.4. Adjustment of a steering shaft
11.4.5. Assessment of a condition of components of a steering drive
11.4.6. Removal and installation of a steering wheel
11.4.7. Removal and installation of a contact cable drum of a steering wheel
11.4.8. Removal and installation of the sensor of an angle of rotation of a steering wheel
11.4.9. Removal and installation of the mechanism of an electronic blokirator of a steering column
11.4.10. Removal and installation of a steering column with the adjustment electric drive
11.4.11. Removal and installation of the steering pump
11.4.12. Removal and installation of the line of cooling of GUR liquid
11.4.13. Removal and installation of the steering mechanism
11.4.14. Design of the steering mechanism
11.5. Suspension bracket geometry
12. Body
13. Onboard electric equipment
14. Schemes of electric connections


 









11-4-9-snyatie-i-ustanovka-mekhanizma-ehlektronnogo-blokiratora-rulevojj-kolonki.html

11.4.9. Removal and installation of the mechanism of an electronic blokirator of a steering column

Details of installation of the mechanism of an electronic blokirator of a steering column (ELV)

37m — the Fixing bolt
37р — the Socket
71 — a column Sleeve

N26/5 — the Module of management of an electronic blokirator

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate a service mode of system of an emergency call of TELE AID (see. Section Activation/deactivation of a service mode of system of an emergency call of TELE AID).
  2. Remove the bottom section of furnish of the dashboard from the driver's party of the car (see. Head Body).
  3. At the corresponding complete set remove a knee emphasis (see. Head Body).
  4. Develop towards sample and take a fixing bolt (37m).
  5. Liberate the module of management of an electronic blokirator (N26/5) from a sleeve of a steering column (71)
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — battery Grounding
  1. Disunite the socket (37р).
  2. Installation is made upside-down.
  3. At the corresponding complete set деактивируйте service mode of TELE AID system.
  4. In summary make cleaning of memory of the processor of system of onboard self-diagnostics (see. Head of System of electric equipment of the engine).


«previous page
11.4.8. Removal and installation of the sensor of an angle of rotation of a steering wheel
following page»
11.4.10. Removal and installation of a steering column with the adjustment electric drive